New Products

Digital room thermostat with set-point adjust. Change-over contacts for both heat and ventilation. Electronic not mechanical switching. Rated at 5 amps, (3 amps inductive)....

CR-300 Control unit for HV-230 A, HV-300 A and HVE-230 A Fitted with: - A selector for the different modes of fan operation (0ff and Two Speed Settings) - A reversing switch to change the airfl...

Provide 2 forward speeds and reverse for the AIRVENT 9 and 12 inch commercial wall/window fans....

Provides fully automatic control. Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells. Activates ventilation system when preset threshold is reached. Can ...

RMT - 3 phase speed controller by auto-transformer. IP54 ABS casing for RMT-1,5 and RMT-2,5 models. IP54 metallic casing from RMT-5 to RMT-12 models. Electrical supply: 3/400V/50-60Hz. Fiv...

The EFSC 0/10 is a 240-volt Fan Speed Controller available in either 6.0 or 10.0Amp; suitable for 2 or 3 wire control of single-phase speed controllable motors. The unit can be controlled from a remot...

Range of single phase 4 pole plate mounted axial fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller. This is the 250mm version, 930m3/hr, Max Power Absorbed ...

Soler & Palau TD6000 Mixvent Series Inline Duct Fan - 400mm Inlet/ Outlet - Airflow 5500m3/h Sound Pressure Level 44db @ 3m The S&P MIXVENT-TD series of in-line duct fans offer one of the most comp...

Soler & Palau TD4000 Mixvent Series Inline Duct Fan - 355mm Inlet/ Outlet - Airflow 3800m3/h Sound Pressure Level 44db @ 3m The S&P MIXVENT-TD series of in-line duct fans offer one of the most comp...

Soler & Palau TD2000 Mixvent Series Inline Duct Fan - 315mm Inlet/ Outlet - Airflow 1550/ 2000m3/hr The S&P MIXVENT-TD series of in-line duct fans offer one of the most comprehensive and flexible i...

Soler & Palau TD1300 Mixvent Series Inline Duct Fan - 250mm Inlet/ Outlet - Airflow 1100/ 1300m3/hr The S&P MIXVENT-TD series of in-line duct fans offer one of the most comprehensive and flexible i...

Extract system ensuring a continuous exhausting of air within residential homes through the extract ports located in several rooms (kitchens, toilets, bathrooms, etc) and air inlets located in the ma...

Powered by an Ultra Low Watt Brushless Motor, the EnviroVent Wall Mounted Unit utilises the latest technology to ensure minimum energy consumption and long term trouble free life. Warm air accumulates...

Whole house heat recovery unit with a high-efficiency heat exchanger up to 92% with constant flow, setting and very low consumption DC motor. Provides a constant supply of fresh tempered air into the...

The heat Sava is an energy efficient, through-the-wall mini ventilation unit called a Single Room Heat Recovery unit (SRHR). It has been designed for people who are looking for new and innovative ways...

Weatherproof Cowl for external walls, Stops drafts blowing back into the building. Comes complete with Padded flaps and a rubber seal to stop unwanted noise and water getting into your house, If yo...

Versio is a series of square ceiling diffusers for supply and exhaust air adapted for false ceilings. Versio is, as the name implies is a versatile diffuser adaptable to suit specific needs. A large s...

Weatherproof Cowl for external walls, Stops drafts blowing back into the building. Available in a kit form HERE Internal flap to stop backdrafts Can also be used with a backdraft damper for maximu...

Grille to cover openings to prevent blockages and prevent fingers entering fan openings. Fits directly over a fan spigot, not the ducting. This is the 100mm version shown. Select your size below....

Provides weather protection for a 100mm PVCu rigid ducted outlet. (100mm inside diameter, 110mm outside) Pushfit and secured with solvent adhesive. Grey. Cowl diameter: 200mm w201 x h101...

Description The Systemair TSK circular supply diffuser. TSK is a perforated version of TST. The gap width is adjustable. Function The TSK is a circular perforated supply diffuser for ceiling inst...

Wall mounted intake and outtake grilles are made of galvanized or aluminium sheet. They are composed of lateral profiles, lamellas and proper corners and of a steel mesh protecting against insects an...

Plastic External Louvre shutters. These are general use shutters for the outside of premises. Suitable for all types of fan. The louvres close when the fan is not in use to stop back drafts. Avail...

Depending on its application, the Metal Circular Grille can be used as an external grille of an air intake or roof vent. The grille is provided with screw holes for mounting. Available in sizes 100...