These are one of the few bathroom fans designed with quietness in mind, with especially quiet motors mounted on elastic blocks. You probably wont find a quieter axial bathroom fan. Also sold by Enviro...
Tecsonic is a range of fully flexible thermal and acoustic insulated ducting which has been specially designed for the HVAC market. The vapour barrier prevents condensation forming on the outside of d...
High quality Aluminium flexible ducting is available to suitably attach the fans to filters and enable easy ducting routes to be laid out.
The Aluminium flexible ducting is made from 2 piles of tough...
Ducting Backdraft Dampers
The BDP01 damper has aluminium lamellae which open during the air flow in one direction and close when air is draught back. When no air is flowing, the lamellae are maint...
Quick Release Jubilee Clamps used to attach fan and duct components to ducting.
Available sizes: 60 - 110mm, 60 - 170mm, 60 - 270mm and 60 - 325mm. (Diameter)...
80mm Suspension rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place.
Consisting of two parts that are assembled with bo...
Aluminium sealing tape with a thickness of 30 microns. Used at joining points of round ducts and fittings, and in flexible ducts.
Temperature resistances up to 120°C
Note: For tapes retained th...
An 80mm Female coupling connector for joining fittings together or to a fan unit.
To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
The FD-C series of circular single blade fire dampers are designed to stop the spread of fire through ducts when passing through walls or floors.
• FD-C dampers are suitable for horizontal or ver...
A 100mm Spigot ring or take-off vent, without radius and gaskets, for connecting to ducting.
Provides a male ducting connection so inserts into spiral.
Designed for installation in the walls of rect...
This is a range of fully flexible thermally insulated ducting, which has been specially designed for the HVAC market. It has been developed to minimise the heat gain or loss resulting from the tempera...
Jet Cowl Ventilation hood for air exit above roof, suitable for both industrial and comfort ventilation. The air is ejected in an upwards-directed jet. This avoids contaminating the air in the vicinit...
Standard Duct Clamps for specific sizes.
Limited adjustment ideal for single size duct systems
Now Available to suit all sizes up to 315mm. (Diameter)
125, 150, 200, 250, and 315...
Back-draft dampers by S&P for the TD-Silent range and inline fans.
Note:
Our BDP range of backdraft dampers will also work, but those are inserted in the ducting as opposed to straight onto the fan ...
Multileaf Volume Control Dampers - Circular Spigoted Case
Balancing dampers were formulated to provide accurate control of airflow within ventilating and air conditioning systems combined with low ...
Dektite Ezi-Seal Flashing
Dektite® EZi-Seal features a revolutionary closed-cell foam gasket which is non-absorbent and non-porous. It hugs the roof line to provide a watertight seal without the nee...