• Model:AKAD-630-4

Rosenberg AKAD 630-4 A1 IP54 400V 50H

£ 799.00 (excl. VAT)

£ 958.80 (inc. VAT)

Rosenberg Axial Fans are mostly used in Air heaters, Heat pumps, Condensers, Cooling units, Evaporators and Chillers. The fans are suitable for handling air and other non-aggressive gases or fumes.
More variants are possible on request (for ex. custom painting).
The motors are available as asynchronous external rotor motors or as electronically commutated (EC) external rotor motors.
The main concern for all axial fans was to keep noise emission low in the main range of application of the fan while having an optimal performance curve with the long and short nozzled inlet cone.
All the listed fans in this catalog correspond to the ErP 2015.
Fans are measured according to accuracy class 1 (DIN 24166). (AC types according to accuracy class 3)
Protection guard Serving as finger protection and depending on the construction type also for mounting the fan onto the inlet cone. If the protection guard is only for safety reasons, the motor supporting function is taken by the motor support.
Inlet cone:
A square inlet cone is installed as standard.
This can differ depending on the required construction type.
Air Performance Curves:
The air performance curves have been established using the intake test method in the test chamber as shown below according to DIN EN ISO 5801.
They show pressure increase as a function of the volume flow and are valid for air with a density of 1,2 kg/m³ with a temperature of t=20°C. Performance curves were recorded in installation type A (free flowing intake and exhaust). Testing conducted with optimal inlet cone and without protection guard.
Important note:
Power consumption of fans change linearly proportional to the density of conveyed air/gas.
Direction of air flow:
The respective available directions of air flow are displayed at the bottom of each fan type page marked with . Improper direction of rotation can overload the motor (not possible with EC motors integrated electronics) ; therefore it is essential to check the direction of rotation before initial operation.
According to the applications the air flow direction can differ. Thats why this information should be given with every request.

Customers also purchased...

1 x Mounting Feet (Pair) for SLC-630-060B-06301 x Jetflow-HIT Metal inline - 150mm1 x GXC9 - High Performance Extract Fan2 x Circ.connection-125 fo EX-140 ATEX unit1 x Access Door for Circular Duct - 300 x 200 - SIZE 351 x Versio Square Ceiling Diffusers - RS141 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm2 x Connection Lead for Td ecowatt & PIR sensor1 x Impeller Side Guard - 500mm1 x CBA-130 Inlet Flange for CBT-1302 x TD1300 Mixvent - 250mm2 x 100mm Round Wall Plate1 x Soler & Palau - HXBR-250 ECOWATT - IP441 x Etaline 250mm1 x KRJ - 280 Inlet Guard1 x DA12/9 Feet1 x Classic SAX30/12AR Window/Wall Mounted1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CBT-100N Centrifugal1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Electronic extractor fan speed controller - FSC 1.51 x Manrose 150mm - XF150BTP1 x Elta Turboflow-TF - 560mm - Single phase1 x Manrose 150mm - XF150BP1 x Helios HQW-200/4 - IP551 x Elta Unpodded Silencer Melinex 2D-560mm1 x CBM 9-9 550w 4P CM 3-Phase - 51284180001 x Soler & Palau TCBB/4-560/L - IP651 x Elta Wall Cowl SWC25/311 x Acopel F400-400/1601 x 1mtr Round Ducting - 125mm1 x DryFan 8 - DH800 8 Litre Desiccant Dehumidifier1 x HRB/4-350-BPN1 x Floor Standing Cooler Fan- SRC-4501 x 125mm Wall Duct - 350mm1 x Chaysol SA 25/13 -single inlet centrifugal fan1 x CBT-130N Centrifugal ATEX II 2G Exe II T31 x 204x60mm Equal T Piece1 x 110 x 54mm Vertical 90 Degree Bend1 x Mounting Feet (pair) for SB-CON 2501 x Airbrick Grille with flange - 204 x 60mm1 x LV100-PS 12v Pullcord Operated Bathroom Fan1 x 150mm Round Connector with Damper1 x SG AW-710 BGr , RAL 90051 x Metal Inline Fan - VENT-355N1 x Soler & Palau TCBB/6-630/L - IP651 x Duct Wrap Insulation - AWDW25mm1 x Access Door 200mm x 200mm1 x Acopel F400-450/1601 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 315mm1 x Soler & Palau TCBT/4-710/H - IP651 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-3AC - Three Phase1 x UB47- Universal Insulated Terminal1 x Soler & Palau - HCBT/6-630/H - IP651 x Elta SCP450-1EC - IP551 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x ELTA - Single Phase Transformer 8amps1 x CCZ-404-T (three Phase)1 x SWF-150 Sidewall Mounted Extractor Fan1 x ELTA - Three Phase Transformer 10amps1 x Mini Diffuser - 100mm1 x CBMT/Q 315-54 1 HEATER KIT1 x Acopel F400-800/1801 x Manrose T12 STANDARD Transformer- T12S1 x Duct Mounted Filter Box - G4 Grade Panel - 450mm1 x FLEX CONNECTOR FOR MFQ-560 FAN1 x TecFire Intumescent Damper - Rectangular 350x350mm1 x HRB/4-500-30-APNC1 x 204x60mm Rectangular to 100mm Round Adaptor1 x Chaysol SAP 18/8 1.5kW 700r.p.m. CC CW V5-single inlet centrifugal fan1 x Ancillary Pack for SLC-5601 x TD2000 Mixvent - 315mm1 x Access Door for Circular Duct - 280 x 80 - SIZE 101 x Metal Inline Fan - VENT-150NK1 x CBM-10/10 515 6P RE VR IP55 (230V50)F V52 x Elta SLC450-1EC -IE5 Motor- IP551 x Roof Axial Cowl - RAW450 in RAL9005 ( JET BLACK)1 x Access Door 450mm x 450mm1 x Woods HT40jm/16/2/5/201 x 220x90mm 45 Degree Vertical Bend1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x BDS 800 RA b/d shutter1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x FSAF355B1DX Silencer 395/81 x DEF-CBM-RE-7 - Protection Guard1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Dynair QCL 200mm (2-Pole)1 x Helios DDF-200 Roof Cowl1 x Soler & Palau TCBB/4-315/H - IP441 x Same Day Shipping Surcharge1 x Etaline 630mm - D4 01 3 Phase1 x K 250 L Sileo1 x Systemair ZAP- 4pole - Three phase -450mm - IP541 x Elta SCP560/4-3AC - IP551 x Jetflow-HIT Metal inline - 160mm1 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Single Phase1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x SPI-100 C Iris damper1 x DA 10/8 4-Pole 550watt 3-Speed1 x 7-Day Digital Time Switch - TCK7D-6A1 x Carriage1 x EnergiSava 210 Low Energy Heat Recovery Unit1 x ZAP 710-63 Plate axial fan1 x OZEO E ECOWATT Wireless Switch - OZEO-ECO-W1 x Soler & Palau - HXTR/4-560/H - IP541 x Belt Drive Cased Axial Fan - 800mm - H version1 x HRT/6-710/30-BQ E21 x HCFB/4-400mm plastic impeller plate fan1 x Purlin Box 630/710 for RAW Cowls1 x Prio 500 3 Phase - 230V or 400V - 50Hz1 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 250mm Spigot1 x Rosenberg AKAD 630-4 A1 IP54 400V 50H1 x FSD-TD 600 x 600 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Insulated extract Plenum 6+11 x Soler & Palau TCBB/4-500/H - IP651 x TD-SILENT 2000/3151 x CBM 7/7 250W 4P T RE-VR (Three Phase)1 x Helios HQW-400/4 - IP551 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x FSD-TD 200mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Flexible PVC Ducting - 220x901 x DEF-1000-AN1 x SG AW 800 Guard grille (GFC)1 x ACO3TO-ADS-VFC-7.1A
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...