• Model:DKHM355-4SW

Rosenberg ATEX DKHM 355-4SW.110.5DF-E75

£ 1,494.95 (excl. VAT)

£ 1,793.94 (inc. VAT)


ATEX DKHM 355-4SW.110.5DF-E75

400VD, 50Hz, Zone1
IP44, Mot. 106-35, KS 3,0m
Atex II 2G Ex h IIB+H2 T3GbX

Rosenberg AC-Radial fans in combination with a voltage-controllable external-rotor motor form a very compact, efficient and optimized fan unit. They impress with low installation depth and a simple installation. Fast start-up is ensured because of well-integrated components.

Those fans are designed and manufactured to be operated in vaporous explosive atmosphere. They are marked in accordance with the Atex directive 2014/34/EU: II 2G Ex h IIB+H2 T3 Gb X

Applications:
Air Handling Units / Roof Fans / Duct Fans

Motors:
The voltage controllable AC-motors are characterized by a compact, robust design and a good controlling behaviour. They are designed by standard with protection class IP44, thermal class F and ignition protection Ex eb or Ex ec.

Motor Protection:
The winding of the motors feature integrated triple Positive Temperature Coefficient (PTC) thermistor temperature sensors according to DIN 44082, which will have to be connected to a PTC thermistor tripping unit with protective mark Ex II (2)G as a motor protection. This specific thermal motor protection is capable of precisely identifying any abnormal operating condition and external influence and will then disconnect the motor from the mains via a contactor in any conceivable malfunction case. It is permissible to install commercially available motor circuit breakers only as additional safety devices, since they are not able to ensure complete motor protection under all conceivable operating conditions (e.g. operation with reduced-voltage). Electrical connection:
The fans are supplied as standard with a connection cable approx. 0.8 m long. Wiring diagrams are glued to the cable outlet side of the fan housing. An Ex connection box is available as an accessory.

Air volume control: Explosion proof external rotor motors.
The design of the motors allows for a stable modulation of the motor speed via a voltage reduction. Only transformer type open-/closed-loop control units may be used for this purpose. For correct assignment refer to the list of accessories. The permissible voltage modulation range of between 25 and 100 % of the nominal voltage meets the typical requirements of systems with a variable air flow. If the system is operated in the reduced-voltage range, the operating current may exceed the nominal current. The percentage current increase in comparison to the nominal current is listed under technical data as Delta I. Open-/closed-loop control units must be designed to handle the maximum operating current. Ex external rotor motors with type of protection „eb“ or „ec“ are not allowed to be used with frequency converters.

PDF Files


DKHM 355-4_W.110.5DF II 2G Ex h IIB+H2 T3 Gb X - Specification Sheets

1 x Duct Fast Clamps - 400mm2 x Elta SCP400/4-1AC - IP551 x Elta SPA400/46-3AC - IP541 x Helios HQW-400/6 - IP551 x Anti Vibration Duct Suspension Rings - 400mm1 x CBT-100 N (230/400V50HZ) LG270-EXDIIBT41 x 110 x 54mm Horizontal 90 Degree Bend1 x Acoustic Box Fans (Inline) - CAB-315 RE1 x 7 Day Programmable TIMECLOCK1 x 110 x 54mm Elbow Bend Male1 x Roof Axial Fan ZAP-500-43 and Cowl - Three Phase1 x Soler & Palau - HXBR/4-400/H - IP541 x Ducting Reducers Short - 355mm-315mm1 x Elta SCP400/4-3AC - IP551 x PIR Sensor - PIR41 x Hydor HPA400/6-1A1 x ELTA - Single Phase Transformer 2amps1 x HRB/6-400-APN1 x Ducting 90 Degree Bend - 400mm1 x Jetflow-HIT Metal inline - 250mm1 x Ducting Reducers Short - 315mm-250mm1 x Duct Suspension Rings - 400mm1 x 100mm Round Wall Plate1 x Ducting 45 Degree Bend - 400mm1 x Spiral Ducting 3 Meters - 300mm1 x ELTA - Single Phase Transformer 12amps1 x ERR 12/1 Centrifugal inline fan1 x Metal Inline Fan - VENT-125NK1 x Duct Termination with Mesh - 315mm1 x Manrose Humidistat - 13611 x Run On Timer - 5s - 4hrs - RT5A1 x B-flow Impeller HCBB/T-450mm1 x Rosenberg ATEX DKHM 355-4SW.110.5DF-E751 x Acoustic Box Fans (Inline) - CAB-1001 x Etaline 315mm - E2 03 (Low Power Version)1 x K 315 L Sileo Metal Tube Fan1 x Heat Resistant In-line Axial Fan - VOK 150/120 H1 x Time Delay Unit - DT20B1 x Metal Inline Fan - VENT-150NK1 x Soler & Palau TCBB/4-450/H - IP651 x Jetflow-HIT Metal inline - 315mm1 x Electronic extractor fan speed controller - FSC 1.51 x Etaline 280mm1 x Jetflow-HIT Metal inline - 100mm1 x CBA-80 Inlet Flange for CBT-801 x Helios ZNE Electronic Fan Overrun Timer1 x Jetflow Silent SJMF-S 250-1EC1 x KTEX 50-25-4 Fan (ATEX)1 x Metal Inline Fan - VENT-100NK1 x Jetflow-HIT Metal inline - 125mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...