Centrifugal extractors manufactured from sheet steel with an epoxy polyester paint finished. All extractors are fitted with centrifugal impeller and single phase 230V-50Hz speed controllable motor. Th...
Centrifugal extractors manufactured from sheet steel with an epoxy polyester paint finished. All extractors are fitted with centrifugal impeller and single phase 230V-50Hz speed controllable motor.
T...
Standard versions on 150mm versions and above now have three speed motors.
Spigot size: 125mm
Airflow: 360m3/hr
Power Absorbed: 27W
Sound level: 23db radiated @ 3M.
The S&P TD SILENT Series In...
The MINI-BOX series consists of centrifugal in-line fans, with acoustically insulated casing and with round spigot (diameter from 100mm to 315mm) for easy connection to round duct system.
Main featur...
Axial flow plate fan for wall mounting
Max Airflow m3/s: 1.076
Speed r/min: 1395
Max Absorbed Current: 0.86
Motor Power KW: 0.187
Sound Level dBA @ 3m: 68
IP Rating; IP54
For use in the ...
For medium to smaller air flow volumes against high resistances.
Specifically made for in-duct installation. High pressure characteristic to overcome resistances of bends, filters etc. Universal in a...
The ATC1-4TK is for use with single phase voltage controllable fans. Auto transformer controllers regulate the voltage output whilst maintaining a true sine wave. The great advantage of this type of c...
The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas v...
• Speed-controllable
• Integral thermal contacts
• Can be installed in any position
• Can be installed outdoors
• Maintenance-free and reliable
The K series is designed for installati...
EC-Basic-T temperature
Art no: 24805
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in se...
Plate Axial Fans - AW Sileo 250-E4 (4 pole) manufactured by Ziehl Abegg (German)
983 m3/hr, 50W motor
These fans are generally quieter than most plate axials fans due to their fan shape, also ...
Soler & Palau TD500 Mixvent Series Inline Duct Fan - 150mm Inlet/ Outlet - Airflow 430/ 580m3/hr - 3 speed motor on both standard and timer versions.
The S&P MIXVENT-TD series of in-line duct fans ...
Flat Roof Updtand for the S&P range of Roof Mounted Mixed Flow Fan.
Flat Roof Up stands JBS:
- For mounting fans on flat roofs
with no up stands
- Internal insulation to avoid condensation
- Pr...
Formo is a range of diffusers for mixed ventilation, which are suspended from the ceiling with a single slot around the diffusers. The diffusers are offered in circular, or square designs with perfora...
The fans of the QCL series are suitable for the ventilation, with wall or panel, in residential, commercial and industrial buildings, where reduced dimensions or adjustable performances are required.
...