• UPC/EAN:8413893872838
  • Model:TDSILENT500

TD-SILENT 500/150

£ 223.58 (excl. VAT)

£ 268.30 (inc. VAT)

Standard versions on 150mm versions and above now have three speed motors.

Spigot size: 150mm
Airflow: 550m3/hr
Power Absorbed: 59W
Sound level:22db radiated @ 3M

The S&P TD SILENT Series Inline Mixed Flow Ultra Quiet Duct Fan

The S&P TD Silent inline fan range are Mixed-flow fans with sound-absorbent insulation. Sound waves produced inside the TD, are directed through the perforated inner skin and absorbed by the layer of sound-absorbent material.
Similar to the already very quiet TD range from S&P but with added sound insulation.
The low profile of the TD-SILENT inline fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings.
You will not believe the sound ratings on the larger fans of this range, they are quite unparalleled by any other fans of that type and size.
Sound levels have been reduced in the inlet and outlet ducts as well as massive reductions in radiated sound levels making the TD-SILENT up to 12dB(A) quieter than major competitors.
As a 'mix-vent' fan these develop less pressure than our acoustic centrifugal box fans, but for use with duct runs shorter than 10 meters or so are perfectly adequate. We anticipate these fans becoming the standard for domestic acoustic in-line extraction systems.

Fitted with rubber gaskets on the inlet and outlet to absorb vibrations, a body that can be dismantled.
Connection box can be rotated 360º, to facilitate easy connection of the power cable.

The Envirovent SILMV is exactly the same product, made in the same factory. Depending on stock we may ship the Envirovent version, which has an extended 5yr warranty.
Click HERE for link to promo movie.



Motors Speed controllable 230 V 50 Hz motor on the standard 3 speed motor version.
Motors are IP44, class B, with ball bearings and safety thermal overload protection.




(Excluding E-Bay)
PDF Files


TD-Silent Series

Available Options

1 x 125mm Round 45 Degree Bend2 x 125mm Round 90 Degree Bend1 x 1mtr Round Ducting - 125mm1 x 125mm Wall Duct - 350mm2 x 125mm Round Connector1 x Airbrick Grille with flange - 204 x 60mm1 x 100mm Round Equal T Piece2 x Acopel F400-180/1601 x Acopel F400-400/1601 x Elta Standard Ambient Flexible Connector - 1000mm1 x Acopel F400-200/1601 x 204x60mm 90 Degree Horizontal Bend1 x Helios AV150 External Wall Fan2 x AR Sileo 500 Cased Axial Fan Guard - SG AXC/AM/AR 5002 x Nicotra AFK 315-40/4M-B1 x PIR Sensor - PIR21 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Acoustic Box Fans (Inline) - CAB-1251 x Helios HRFD 315/21 x Elta SLC630/4-1AC - IP551 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-9000/500 ND - Pack 41 x Commercial Activated Carbon Filters - Panel Type - 24" x 24" x 1" - ACP1 x Commercial Activated Carbon Filters - Panel Type - 18" x 18" x 1 - ACP1 x Soler & Palau - HCBT/4-450/H - IP651 x 125mm Round Equal T Piece1 x 125mm - 150mm Round Reducer1 x HCFT/4-450mm plastic impeller plate fan1 x HRT/4-450/35-BPN1 x Elta SCP450/4-1AC - IP551 x HXP450/4-3 - 4 Pole - Three Phase1 x HXP450/4-1 - 4 Pole - Single Phase1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x 125mm Round Connector with Damper1 x 125mm Round Wall Plate1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x CMT-2 250-100 3KW - LG0 Single inlet centrifugal fan direct driven1 x 125mm - 100mm Round Reducer1 x WGZ500- Vent Axia Fan Guard 500mm1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x CBT-100N Centrifugal1 x Fresh Air control carbon filter - 125mm1 x Duct Suspension Rings - 450mm1 x Ducting Y Piece - 200mm1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x Ducting 45 Degree Bend - 200mm1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x Curved boot - 900mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x FlameProof Plate Axial Fan - Three Phase - 15 inches - Eexd IIC T4 -4pole1 x 100mm Wall Duct - 350mm1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -4pole1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Spiral Duct Grille Termination - 450mm1 x DEF-140T Inlet Guard for the CBT-100N1 x SG AW 910 Guard grille (GFC)1 x MRJ 250/350 S - protection guard from S&P1 x SG AXC/AM/AR 800 guard grill1 x EX 140A-4C Mounting Kit for 125mm Duct1 x Male Ducting Connector - 125mm1 x CBTR/2-451-4kw1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 500mm1 x CBT-170 Centrifugal
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...