• Model:SPI-150CIR

SPI-150 C Iris damper

£ 47.92 (excl. VAT)

£ 57.50 (inc. VAT)

The SPI is an iris damper for measuring and adjusting the air flow. The SPI has the following specifications: low noise level, centrically-formed air flow and fixed test points for precise measurements. The damper also has an adjustment aperture which can be opened completely, which means there is no need for an access door for cleaning. Available in sizes ø 80-800mm.

The damper is manufactured from galvanised sheet steel and is fitted with a rubber seal tested for air-tightness. Permitted ambient temperature is 70 °C.

This device can be used for exhaust air.

Mounting
The SPI adjustment damper must be installed in accordance with the distances required to minimise air-flow deviation. Reducing or enlarging the duct to the next duct size does not require any specified distances for minimising deviation. The SPI enables the taking of precise air-flow measurements at all points including points close to duct deviations such as T junctions and bends, and points in front of other supply-air devices.

Protective distance
before bends - 1 x D
after - 1 x D
before T-pipes - 3 x D
after - 1 x D
before supply-air devices - 3 x D
1 x UB47- Universal Insulated Terminal1 x Duct Termination with Mesh - 150mm1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven3 x Speed Controller - REB11 x Silent 100 Window Kit - windowS1 x Transformer 5 Speed Controller - ATC1-8TK1 x RDS 11 Helios Transformer Controller With Motor Protection1 x Helios TSW 1.5 Amp Transformer speed controller5 x Single phase speed controller by auto-transformer - RMB 1.5 Amp3 x Insulated extract Plenum 8+12 x Insulated extract Plenum 6+12 x Vent Axia ACM 125 inline mixed flow duct fan1 x Remote Timer Control - 13512 x Transformer (silent) speed controller - RE 3.0 Amp1 x Transformer 5 Speed Controller - ATC1-10TK1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Vent Axia ACM 200 inline mixed flow duct fan1 x DEF-140T Inlet Guard for the CBT-100N4 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Push Timer Switch - ZA41 x CS2 Current Switch2 x Systemair Save Connect 2.0 Internet Module1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Isolator Switch - ISOSW1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x ERR 20/1 Centrifugal inline fan4 x RRB- transformer controller1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Vent Axia T-Series Controller1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CBS-60 Outlet Flange for CSB/CBT-602 x TG-K3/NTC10-01 - Duct temperature sensor1 x CBA-60 Inlet Flange for CBT-601 x Transformer Speed Control - RTRE- 7.0Amp1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Airvent ceiling fan controller4 x Transformer Speed Control - RTRE- 1.5Amp1 x Speed Controller - REB101 x MTS10- extractor fan 3 step switch1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT1 x Elta Variable Speed Drive IP66 - 0.75KW1 x QPTW 250C Acoustic Twin Fan with Controller2 x Vent Axia Silent 100T (TIMER)1 x Speed Controller - REB5
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...