• Model:SPI-315CIr

SPI-315 C Iris damper

£ 100.01 (excl. VAT)

£ 120.01 (inc. VAT)

The SPI is an iris damper for measuring and adjusting the air flow. The SPI has the following specifications: low noise level, centrically-formed air flow and fixed test points for precise measurements. The damper also has an adjustment aperture which can be opened completely, which means there is no need for an access door for cleaning. Available in sizes¸ 80-800mm. This is the 315mm version.

The damper is manufactured from galvanised sheet steel and is fitted with a rubber seal tested for air-tightness. Permitted ambient temperature is 70 °C.

This device can be used for exhaust air.
Mounting
The SPI adjustment damper must be installed in accordance with the distances required to minimise air-flow deviation. Reducing or enlarging the duct to the next duct size does not require any specified distances for minimising deviation. The SPI enables the taking of precise air-flow measurements at all points including points close to duct deviations such as T junctions and bends, and points in front of other supply-air devices.
Protective distance
before bends - 1 x D
after - 1 x D
before T-pipes - 3 x D
after - 1 x D
before supply-air devices - 3 x D
PDF Files


SPI-315-C Data Sheet

1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Dektite Combo Pipe Flashing - DC210REC1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase1 x Elta Cased Axial Flange - 630mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Jetflow-HIT Metal inline - 150mm1 x Wall Mounted Air Curtains - COR-N Series1 x Mounting Feet (Pair) for SLC-630-060B-06301 x CADB/T-HE PRO-REG Series1 x Soler & Palau - HCBT/6-1000/H - IP551 x Economy Airvent 100mm Fan with Timer & Shutter1 x CBMT/Q 400-55 1 HEATER KIT1 x Insulated extract Plenum 6+12 x CBMT/Q 400-9 3 HEATER KIT2 x U42K Screws for duct1 x HV STYLVENT Wall Kit Threaded Rods1 x HCFB/4-630mm plastic impeller plate fan1 x Elta SLC500/4B-1AC - IP551 x 220x90mm 45 Degree Vertical Bend1 x CRVT/4-500 N Roof mounted Fan - vertical discharge1 x Soler & Palau HXM-350mm1 x 125mm - 150mm Round Reducer1 x Topvex SF12 HWL. Supply AHU1 x Isolator Switch - EFF-ISO1 x Etaline Max-Fan - 315mm - E2 011 x Inclined Curb support BI-3 for TH-5001 x CK-60F Kit1 x ELTA - Single Phase Transformer 8amps1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x Raptor SDA500/4-1AC1 x HRU Controller1 x CADB/T-HE 54 ECOWATT Series1 x Compact SCD500/4-3AC1 x DA12/9 Feet1 x ERR 12/1 Centrifugal inline fan1 x Elta SLC500-1EC -IE5 Motor- IP551 x Soler & Palau TCBT/4-710/L - IP651 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt VR RE1 x Acopel F400-450/1601 x HCFT/4-250mm plastic impeller plate fan1 x Soler & Palau - HXTR/4-500/H - IP541 x 110 x 54mm Rectangular Wall Plate
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...