160mm Spiral
160mm Spiral Ducting Bends and Connectors
Displaying 1 to 13 (of 13 products)
Anti Vibration Duct Suspension Rings - 160mm
£ 6.00
150mm Suspension rings with anti vibration EPDM rubber gasket for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place.
Consisting...
Duct Suspension Rings - 160mm
£ 6.91
150mm Suspension rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place.
Consisting of two parts that are assembled with b...
Ducting 45 Degree Bend - 160mm
£ 9.92
160mm Ducting 45 Degree pressed bend, seam-welded and calibrated, without gasket....
Ducting Reducers Short - 160mm
£ 8.65
Short Reducers for 160mm spiral ducting.
Provides two male fittings to insert into spiral.
Select size below.
Please note these are for reducing and fitting inside ducting. To mount directly onto a...
Ducting T Piece Equal - 160mm
£ 20.72
160mm Ducting Equal T-Piece
Vent tee piece built with a saddle or a fully pressed top section, all connections the same size....
Female Ducting Connector - 160mm
£ 5.06
A 160mm Female coupling connector for joining fittings together or to a fan unit.
To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
Male Ducting Connector - 160mm
£ 3.25
A 160mm male coupling connector for joining two pieces of ductwork together.
Can also be used with hose clips to join lengths of flexible ducting....
Spigot plate - 160mm
£ 29.94
Connects a duct to a wall face or rectangular ductwork, provides a 160mm male spigot surrounded by a square plate of steel. Plate size 300mm square. ...
Spiral Duct Grille Termination - 160mm
£ 16.59
160mm EPNF Spiral Duct Termination Grills are male-ended fittings to be inserted directly into round Spiral ducts.
The 12.7x12.7mm mesh installed at the termination end secures the air exhaust again...
Spiral Ducting 1 meter - 160mm
£ 12.12
160mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 Specification unless otherwise stated.
An alterna...
Spiral Ducting 3 Meters - 160mm
£ 35.16
160mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated.
An al...
Spiral end cap - 160mm
£ 7.64
160mm Spiral end cap.
Up to 315mm they are both male and female for flexibility.
The male end will insert into spiral ducting, the female end will go over spigots or fittings....
Displaying 1 to 13 (of 13 products)
1 x *NEW* TD EVO-200 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x 220x90mm Insulated Rectangular T-Piece1 x Elta Variable Speed Drive IP66 - 0.75KW1 x MV EC 150 Multivent1 x SG AW 1000 Guard 6 (GFC)1 x WGZ500- Vent Axia Fan Guard 500mm1 x AEL - Outlet Flexible Connection for TLZ450 R1 x KRJ - 250 Inlet Guard1 x Acopel F400-450/1601 x 220x90mm Insulated Rectangular Horizontal 90° Bend2 x Spiral Ducting 1 meter - 150mm1 x Elta SCP315/4-1AC - IP551 x Ducting T Piece Equal - 710mm1 x Impeller Side Guard - 800mm1 x KRJ - 355 Inlet Guard1 x Spigot plate - 150mm1 x Nicotra RDH E4-0250 (K)1 x Spiral Ducting 3 Meters - 560mm1 x Impeller Side Guard - 630mm1 x Spiral Ducting 1 meter - 250mm1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x 220x90mm x 2m Insulated Rectangular Duct1 x Spiral end cap - 250mm1 x Pre 10:30 Delivery Surcharge1 x Plate Axial Wire Protection Guard - DEF-D-375mm1 x Ancillary Pack for SLC-710 for 4 pole Motors1 x Impeller Side Guard - 710mm1 x Spiral Ducting 3 Meters - 355mm1 x SG-200 Fan Guard for the HQW 2001 x Soler & Palau - HXBR/4-315/H - IP541 x Ducting 90 Degree Bend - 200mm1 x Male Ducting Connector - 180mm1 x Spiral Duct Grille Termination - 150mm1 x Ancillary Sealing Band - 150mm1 x CC-710-2.2kw1 x Ducting 45 Degree Bend - 150mm1 x Curved boot - 150mm1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x Anti Vibration Duct Suspension Rings - 150mm1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Spiral Ducting 3 Meters - 400mm1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Duct Fast Clamps - 150mm1 x Female Ducting Connector - 180mm1 x Female Ducting Connector - 250mm1 x Spiral Duct Grille Termination - 80mm1 x Duct Termination with Mesh - 100mm1 x ACO-TK-ADS Auto Changeover Panel - Single Phase
Best sellers
Reviews
