180mm Spiral
180mm Spiral Ducting Bends and Connectors
Displaying 1 to 12 (of 12 products)
Male Ducting Connector - 180mm
£ 4.32
A 180mm male coupling connector for joining two pieces of ductwork together.
Can also be used with hose clips to join lengths of flexible ducting....
Flanged Spigot - 180mm
£ 4.50
A 180mm Spigot ring or take-off vent, without radius and gaskets, for connecting to ducting.
Provides a male ducting connection so inserts into spiral.
Designed for installation in the walls of rect...
Female Ducting Connector - 180mm
£ 5.38
A 180mm Female coupling connector for joining fittings together or to a fan unit.
To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
Duct Suspension Rings - 180mm
£ 7.94
180mm Suspension rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place.
Consisting of two parts that are assembled with b...
Ducting 45 Degree Bend - 180mm
£ 10.75
180mm Ducting 45 Degree pressed bend, seam-welded and calibrated, without gasket....
Ducting 15 Degree Bend - 180mm
£ 11.63
180mm Ducting 15 Degree pressed bend, seam-welded and calibrated, without gasket....
Ducting Reducers Short - 180mm
£ 12.31
Short Reducers for 180mm spiral ducting.
Provides two male fittings to insert into spiral.
Select size below.
Please note these are for reducing and fitting inside ducting. To mount directly onto a...
Ducting 30 Degree Bend - 180mm
£ 14.05
180mm Ducting 30 Degree pressed bend, seam-welded and calibrated, without gasket....
Spiral Ducting 1 meter - 180mm
£ 17.31
180mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 Specification unless otherwise stated.
An alterna...
Spiral Ducting 3 Meters - 180mm
£ 41.33
180mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated.
An al...
Displaying 1 to 12 (of 12 products)
1 x Flanged Spigot - 125mm1 x FSD-TD 150mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Spiral end cap - 500mm1 x CFI Lite 600 Carbon Filter1 x FSD-TD 300 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM24-TF (SC)1 x Differential Pressure Switch - 50 - 500 Pa - IP651 x Duct Split Rings (Pair) -710mm1 x Ducting 45 Degree Bend - 500mm1 x Digital Room Thermostat - DRT1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 180mm1 x DV-ROF-V-315 Roof mounted unit1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x Anti Vibration Duct Suspension Rings - 80mm1 x Spiral Duct Grille Termination - 500mm1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 250mm1 x Soler & Palau - HCBT/6-800/H - IP651 x 110 x 54mm Flat Channel Connector1 x 150mm Round Connector1 x Fresh Air control carbon filter - 125mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt VR RE1 x AL 710 D4 mounting Feet (Pair)1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Soler & Palau TCBB/4-250/H - IP541 x Impeller Side Guard - 500mm1 x Impeller Side Guard - 350mm1 x AL 400 Mounting Feet (Pair)1 x Impeller Side Guard - 630mm1 x HCFT/4-800mm plastic impeller plate fan1 x Ducting T Piece Equal - 450mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x KVK SLIM 355 EC - Centrifugal Circular Duct Fan1 x Ducting 30 Degree Bend - 180mm1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Impeller Side Guard - 400mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Ducting 15 Degree Bend - 180mm1 x GX6 Wall Kit1 x Impeller Side Guard - 800mm
Best sellers
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99
Unbelievable! With TDmixvent500: noise reduction minimum 50%...