630mm Spiral
630mm Spiral Ducting Bends and Connectors
Displaying 1 to 18 (of 18 products)
Duct Split Rings (Pair) -630mm
£ 14.90
630mm Duct split rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place....
Duct Termination with Mesh - 630mm
£ 158.43
630mm Angled exhaust take-off (with bird mesh) at 45 Degrees, designed for terminating round ducts.
Also known as Birdbeaks....
Ducting 45 Degree Bend - 630mm
£ 43.42
630mm Ducting 45 Degree fabricated bend, seam-welded and calibrated, without gasket....
Ducting Reducers Long - 630mm
£ 44.72
Long Reducers for 630mm spiral ducting.
Provides two male fittings to insert into spiral.
Select size below.
Please note these are for reducing and fitting inside ducting. To mount directly onto a ...
Ducting T Piece Equal - 630mm
£ 114.31
630mm Ducting Equal T-Piece
Vent tee piece built with a saddle or a fully pressed top section, all connections the same size....
Ducting T Piece Unequal - 630mm
£ 83.82
630mm Ducting Unequal T-Piece
Similar to a normal T-Piece except the branch is smaller than the main duct (630mm).
These are normally made to order.
Select middle spigot size below.
Please ask for...
Female Ducting Connector - 630mm
£ 13.25
A 630mm Female coupling connector for joining fittings together or to a fan unit.
To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
Flanged Spigot - 630mm
£ 13.00
A 630mm Spigot ring or take-off vent, without radius and gaskets, for connecting to ducting.
Provides a male ducting connection so inserts into spiral.
Designed for installation in the walls of rect...
Male Ducting Connector - 630mm
£ 13.25
A 630mm male coupling connector for joining two pieces of ductwork together.
Can also be used with hose clips to join lengths of flexible ducting....
Pressed Ducting Saddle - 630mm
£ 45.00
Pressed ducting saddle to fit 630mm Spiral ducting, without gasket.
Select take-off size below.
...
Shoed T Piece Un-Equal -630mm-500mm
£ 113.47
630mm Shoed Un-Equal T-Piece
630-630-500mm
Galvanised T Joiner Ducting Fixture.
630mm is the size of the two end spigots, 500mm the single central spigot.
These are made to order and can take up...
Spigot plate - 630mm
£ 78.22
Connects a duct to a wall face or rectangular ductwork, provides a 630mm male spigot surrounded by a 1m2 square plate of steel....
Spiral Duct Grille Termination - 630mm
£ 77.00
630mm EPNF Spiral Duct Termination Grills are male-ended fittings to be inserted directly into round Spiral ducts.
The 12.7x12.7mm mesh installed at the termination end secures the air exhaust again...
Spiral Ducting 1 meter - 630mm
£ 72.69
630mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 Specification unless otherwise stated.
An alterna...
Spiral Ducting 3 Meters - 630mm
£ 115.76
630mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated.
An alt...
Displaying 1 to 18 (of 18 products)
1 x Flanged Damper 019-0250-STD1 x BDS 630/710 RA b/d shutter1 x Air Quality Sensor - AQS1 x Commercial Thermostat - TH161 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Contactor Interface Station - CI91 x CO2 Room Sensor - CO2-R1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x CS2 Current Switch1 x DT-1 Duct Mounted Thermostat1 x Differential Pressure Switch - 20 - 300 Pa - IP651 x Atex Motor Protection Switch - U-EK230E EX1 x VKS 355-500 Automatic shutter1 x BDS 800 RA b/d shutter1 x JCA 560 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x Backdraught Shutters 039-SFSV-63/711 x BDS 300/315 RA b/d shutter1 x BDS 350 RA b/d shutter1 x AES-Fire control unit1 x DTV200 - Differential Pressure Switch1 x BEAS-control module1 x EC Trickle and boost module - IP561 x Differential Pressure Switch - 20 - 300 Pa - IP541 x Differential Pressure Switch - 50 - 500 Pa - IP651 x Spiral Ducting 3 Meters - 355mm1 x Flanged Spigot - 125mm1 x Electronic extractor fan speed controller - FSC 1.51 x Delivery Surcharge1 x Elta SLC560/4B-1AC - IP551 x EBM Papst - D2E133-DM27-D81 x Nicotra Direct Delivery Surcharge1 x HPA Heavy Duty Flexible Ducting1 x FAST-TRACK RANGE 75mm - Adjustable Air Restrictor1 x Flexible PVC Ducting - 15 Mtr1 x Direct Delivery Surcharge1 x FAST-TRACK RANGE 75mm - Straight Connector1 x Northern Ireland Surcharge1 x Pre 10:30 Delivery Surcharge1 x Carriage1 x Direct AM Delivery Surcharge1 x FAST-TRACK RANGE 75mm - Valve Adaptor 90° 125mm1 x Spiral Ducting Additional Courier Surcharge1 x Stainless Duct Delivery Charge (Standard 2 x 1.5m)1 x HRT/4-450/35-BPN1 x Elta SCP450/4-3AC - IP551 x Helios HQW-450/4 - IP551 x Elta SCP450/4-1AC - IP551 x Elta SPA450/46-3AC - IP541 x Spiral Ducting 3 Meters - 710mm1 x CBMT/Q 150-27 1 HEATER KIT1 x Ducting 90 Degree Bend - 710mm1 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x HCFB/4-450mm plastic impeller plate fan1 x HXP450/6-3 - 6 Pole - Three Phase1 x Connection Lead for Td ecowatt & PIR sensor1 x 18M - 80mm PVC flexible ducting1 x Duct Suspension Rings - 250mm1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x HQS Bathroom Axial Flow Fan - 125mm1 x Fresh Air control carbon filter - 125mm1 x Economy Airvent 100mm Fan with Timer1 x Elta SCP315/4-1AC - IP551 x AMCL1002 - LPHW coil only
Best sellers
!["VX100" - Standard Bathroom Axial fan - 100mm](images/thumbs/150_150/Screenshot-2023-10-27-115227.jpg ""VX100" - Standard Bathroom Axial fan - 100mm")
