710mm Spiral
710mm Spiral Ducting Bends and Connectors
Displaying 1 to 14 (of 14 products)
Duct Split Rings (Pair) -710mm
£ 17.90
710mm Duct split rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place....
Duct Termination with Mesh - 710mm
£ 174.26
710mm Angled exhaust take-off (with bird mesh) at 45 Degrees, designed for terminating round ducts.
Also known as Birdbeaks....
Ducting 45 Degree Bend - 710mm
£ 65.00
710mm Ducting 45 Degree fabricated bend, seam-welded and calibrated, without gasket....
Ducting Reducers Long - 710mm
£ 68.00
Long Reducers for 710mm spiral ducting.
Provides two male fittings to insert into spiral.
Select size below.
Please note these are for reducing and fitting inside ducting. To mount directly onto a ...
Ducting T Piece Equal - 710mm
£ 130.00
710mm Ducting Equal T-Piece
Vent tee piece built with a saddle or a fully pressed top section, all connections the same size....
Female Ducting Connector - 710mm
£ 14.37
A 710mm Female coupling connector for joining fittings together or to a fan unit.
To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
Flanged Spigot - 710mm
£ 18.00
A 710mm Spigot ring or take-off vent, without radius and gaskets, for connecting to ducting.
Provides a male ducting connection so inserts into spiral.
Designed for installation in the walls of rect...
Male Ducting Connector - 710mm
£ 13.74
A 710mm male coupling connector for joining two pieces of ductwork together.
Can also be used with hose clips to join lengths of flexible ducting....
Spigot plate - 710mm
£ 95.00
Connects a duct to a wall face or rectangular ductwork, provides a 710mm male spigot surrounded by a 800mm square plate of steel....
Spiral Ducting 1 meter - 710mm
£ 83.60
710mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 Specification unless otherwise stated.
An alterna...
Spiral Ducting 3 Meters - 710mm
£ 136.83
710mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems.
Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated.
An alt...
Displaying 1 to 14 (of 14 products)
1 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x Elta Viper SCC Duct Mounted Centrifugal Fan - SCC630-1AC1 x Spiral Ducting 1 meter - 355mm1 x Flat Roof Terminal -OFT 5 - EPDM1 x Spigot plate - 250mm1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Belt Drive Cased Axial Fan - 560mm - L version1 x Belt Drive Cased Axial Fan - 630mm - H version1 x Belt Drive Cased Axial Fan - 710mm - H version1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x Belt Drive Cased Axial Fan - 800mm - L version1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Multiflow SMB650/4-3AC1 x 2mtr Round Ducting - 150mm1 x 150mm Round Equal T Piece1 x 150mm Round 45 Degree Bend1 x 1mtr Round Ducting - 150mm1 x Multiflow SMB650/4-1AC1 x Kitchen Grease Filter - Mesh Type Non standard : 381 x 355 x 47mm1 x Flanged Spigot - 80mm1 x Soler & Palau - HCBT/6-355/H - IP651 x 125mm Insulated Round T-Piece1 x Ducting 90 Degree Bend - 200mm1 x Ducting 90 Degree Bend - 900mm1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x Ducting 30 Degree Bend - 355mm1 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x Dektite Combo Pipe Flashing - DC210REC1 x TTT/4-500/H N 0,75KW (230/400V50HZ)EXEIIT3 VE Atex Unit1 x Impeller Side Guard - 400mm1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Access Door for Circular Duct - 280 x 80 - SIZE 101 x HRT/4-630/25-APN C21 x Dynair QCL 200mm (2-Pole)1 x Blast Gate (Manual) 180mm1 x Elta SLC630/4-1AC - IP55
Best sellers
