80mm Spiral

100mm Spiral Ducting Bends and Connectors

Displaying 1 to 13 (of 13 products)
Anti Vibration Duct Suspension Rings - 80mm
Anti Vibration Duct Suspension Rings - 80mm
£ 3.99
80mm Suspension rings with anti vibration EPDM rubber gasket for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place. Consisting ...
Duct Suspension Rings - 80mm
Duct Suspension Rings - 80mm
£ 5.91
80mm Suspension rings for solid or semi flexible ducting, Can be used to hang from a ceiling or mount onto the wall securing the ducting in place. Consisting of two parts that are assembled with bo...
Ducting 45 Degree Bend - 80mm
Ducting 45 Degree Bend - 80mm
£ 4.33
80mm Ducting 45 Degree pressed bend, seam-welded and calibrated, without gasket....
Ducting 90 Degree Bend - 80mm
Ducting 90 Degree Bend - 80mm
£ 4.26
80mm Ducting 90 Degree pressed bend, without gasket....
Ducting T Piece Equal - 80mm
Ducting T Piece Equal - 80mm
£ 11.41
80mm Ducting Equal T-Piece Vent tee piece built with a saddle or a fully pressed top section, all connections the same size....
Female Ducting Connector - 80mm
Female Ducting Connector - 80mm
£ 3.14
An 80mm Female coupling connector for joining fittings together or to a fan unit. To Join two pieces of ducting together, you will need the CONM - Male Ducting Connector...
Flanged Spigot - 80mm
Flanged Spigot - 80mm
£ 2.50
A 80mm Spigot ring or take-off vent, without radius and gaskets, for connecting to ducting. Provides a male ducting connection so inserts into spiral. Designed for installation in the walls of recta...
Male Ducting Connector - 80mm
Male Ducting Connector - 80mm
£ 2.99
An 80mm male coupling connector for joining two pieces of ductwork together. Can also be used with hose clips to join lengths of flexible ducting....
Spigot plate - 80mm
Spigot plate - 80mm
£ 24.99
Connects a duct to a wall face or rectangular ductwork, provides a 80mm male spigot surrounded by a square plate of steel. Plate size 300mm square. ...
Spiral Duct Grille Termination - 80mm
Spiral Duct Grille Termination - 80mm
£ 27.14
80mm EPNF Spiral Duct Termination Grills are male-ended fittings to be inserted directly into round Spiral ducts. The 12.7x12.7mm mesh installed at the termination end secures the air exhaust agains...
Spiral Ducting 1 meter - 80mm
Spiral Ducting 1 meter - 80mm
£ 7.20
80mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems. Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 Specification unless otherwise stated. An alternat...
Spiral Ducting 3 Meters - 80mm
Spiral Ducting 3 Meters - 80mm
£ 18.86
80mm Zinc-plated Mild Steel Spiral Tube used for ventilation systems. Spiral ducting is manufactured 0.6mm of Zinc-plated Mild steel to HVCA DW 144 specification unless otherwise stated. An alte...
Spiral end cap - 80mm
Spiral end cap - 80mm
£ 4.23
80mm Spiral end cap. Up to 315mm they are both male and female for flexibility. The male end will insert into spiral ducting, the female end will go over spigots or fittings....
Displaying 1 to 13 (of 13 products)
0 items
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...