• UPC/EAN:8413893271631
  • Model:SWF-100X

SWF-100X Sidewall Mounted Extractor Fan

£ 328.46 (excl. VAT)

£ 394.15 (inc. VAT)

Range of direct drive externally mounted centrifugal fans, manufactured from high grade pressed galvanized steel protected against corrosion by polyester paint finish. All the fans are provided with a removable top for easy access to motor for cleaning or inspection, a large grille opening, a back-draft damper, a pre-wired terminal box and a backward curved centrifugal impeller.
All the motors are single-phase 230V - 50Hz, IP44, Class F, with ball bearings greased for life, and safety thermal overload protection of manual reset type.
The SWF series is ideally suited for a wide range of residential, commercial and industrial exhaust ventilation applications where the fan needs to be mounted externally.

The Sidewall Fan Series (SWF) of direct drive centrifugal ventilation fans consists of five model sizes ranging from 4-8. All models are designed for direct connection in-line with standard diameter round ducting. Airflow performance values range from 165M3/h(119 CFM) up to 770M3/h (416 CFM).

All SWF series models incorporate a powerful external rotor motor that has been factory matched to a nonoverloading backward curved centrifugal fan wheel. This powerful combination enables the SWF to deliver exceptional airflow performances against high static pressure typically found in ducted ventilation systems. All motors within the SWF series are fully speed controllable using voltage or frequency control regulators.

The SWF series has been designed for easy through the wall installation. The totally enclosed motor design allows for the SWF to operate in high moisture, lint and dust laden air, Perfect for kitchens, bathrooms and utility rooms. All models are manufactured with high quality materials and workmanship that is supported by a comprehensive five (5) year warranty.

The SWF series features a corrosion resistant galvanized steel casing with a baked enamel coating that can be painted to match the exterior wall. The unit also includes a built-in backdraft damper and an extended opening exhaust grille. The larger grille allows for the easy exhaust of dirty or lint laden air while the spring-loaded backdraft damper helps prevent insects, etc. from entering duct work.

The SWF100x fans feature Class F Motor Insulation making them the ideal fans for Clothes Dryer Boosting applications. Built-in Spring-loaded Backdraft Damper Supply/Exhaust for ducts SWF-SIDEWALL Warranty Five (5) year limited warranty.

Casing
• Externally mounted
• Manufactured from high grade pressed galvanized steel, with baked enamel coating.

• Removable top for easy access to motor for cleaning or inspection.

• Large grille opening for easy passing of lint and other potentially clogging materials.

• Includes prewired terminal box.

Wheel/Impeller
• Backward curved centrifugal type.

• Factory matched to an external rotor motor and dynamically balanced to eliminate vibration.

Accessories
• A wide range of accessories are available to complete the most demanding installation.




Model ------ (m3/h) ----- (dB(A))
SWF-100X-- 325 ---------- 55
PDF Files


SWF Series

1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x Acopel F400-355/1601 x DA7/7 Feet1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x FSAF1250C1DA Silencer 1320/201 x Acopel F400-400/1601 x ELTA - Single Phase Transformer 8amps1 x Airvent ceiling fan controller1 x CBMT/Q 250-30 1 HEATER KIT2 x AES-Fire control unit1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Elta SCP450-1EC - IP552 x Elta Unpodded Silencer Melinex 1D-450mm2 x HRSB/6-710/24-BZ1 x Blast Gate (Manual) 300mm3 x Metal Inline Fan - VENT-400N2 x Ducting 30 Degree Bend - 150mm1 x EBM Papst W3G630-GG97-011 x CBM 7/9 4p 300W RE-VR1 x Elta SPA630/46-3AC - IP541 x Soler & Palau TCBB/4-400/H - IP441 x GEO Ground Source Heat Exchanger1 x Flexible PVC Ducting - 15 Mtr1 x CBP-DC 18/181 x Airvent Ceiling Sweep Fan - 36 inch - 4441221 x Elta SLC355-1EC -IE5 Motor- IP552 x 100mm Wall Duct - 350mm1 x CBMT/Q 315-54 1 HEATER KIT1 x CBM 15/15 6p 3phase 2.2kw1 x Soler & Palau TCBT/4-450/H - IP651 x Duct Mounted Filter Box - MINICELL F7 Grade Panel Filter 300mm Spigot1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Flexible PVC Ducting - 220x901 x Metal Inline Fan - VENT-355N1 x 1mtr Round Ducting - 100mm1 x Access Door for Circular Duct - 500 x 4001 x Ancillary Pack for SLC-5601 x Ancillary Pack for SLC-6301 x Soler & Palau TCBB/4-450/H - IP651 x Isolator Switch - ISOSW1 x Impeller Side Guard - 630mm1 x Duct Mounted Filter Box With Paper G2 AND Metal Washable Filter - 250mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x Etaline 355mm E4 011 x 204x60mm 90 Degree Vertical Bend1 x OZEO E ECOWATT Wireless Switch - OZEO-ECO-W1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Flexible PVC Ducting - 110x541 x SG AW 800 Guard grille (GFC)1 x Helios GigaBox 450mm GBD 450/4/4 centrifugal1 x 150mm Round Connector1 x Elta SCP630-1EC - IP551 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF500/4-3AC - Three Phase1 x 204x60mm Flat Channel Connector1 x Soler & Palau - HCFT/4-1000/H-X - IP551 x Acopel F400-710/1801 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x Elta SLC500-1EC -IE5 Motor- IP551 x CO2 Room Sensor - CO2-R1 x 110 x 54mm Elbow Bend Male1 x Helios HQW-710/6 - IP551 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x Rosenberg EQ 300-2 plate axial fan1 x 125mm Round Wall Plate1 x AXCBF 315D4-32 Bifurcated Axial Fan1 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x HCFB/4-400mm plastic impeller plate fan1 x Jetflow-HIT Metal inline - 125mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x TD1300 Mixvent - 250mm1 x Soler & Palau - HCBT/6-500/H - IP651 x CBM 12-12 1100w 6P Three Phase1 x 125mm - 100mm Round Reducer1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Elta Cased Axial Flange - 400mm1 x MV-Silent 250 Bathroom Extractor Fan Kit - Standard - No Timer1 x Kitchen Grease Filter - Mesh Type NON standard 390mm x 240mm x 40mm Actual1 x Elta SLC560-1EC -IE5 Motor- IP551 x Soler & Palau - HXBR/4-500/H - IP541 x HRT/4-500/35-BPN1 x Helios GigaBox 450mm GBD 450 centrifugal - EC Motor1 x Spiral Ducting Additional Courier Surcharge1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-3AC - Three Phase1 x CBMT/Q 200-54 1 HEATER KIT1 x CBB-60N Centrifugal1 x Metal Inline Fan - VENT-125NK1 x CBS-100 Outlet Flange for CBT-1001 x 100mm - 125mm Round Reducer1 x Etaline 400mm D2-01 3-phase1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF450/4-1AC - Single Phase1 x 110 x 54mm Flat Channel Connector1 x Stainless Steel IL Flanged Spigot-400mm1 x 110 x 54mm Horizontal 90 Degree Bend1 x 220x90mm 45 Degree Horizontal Bend1 x Rectangular Airbrick Adaptor1 x TecFire Intumescent Damper - Rectangular 250x250mm1 x Round ceiling diffuser 250mm1 x SWF-100X Sidewall Mounted Extractor Fan1 x Acopel F400-250/1601 x Elta Unpodded Silencer Melinex 1D-560mm1 x Floor Standing Cooler Fan- SRC-4501 x Belt Drive Cased Axial Fan - 560mm - H version1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 500mm1 x Elta SPA400/4-1AC - IP541 x HA-600 SLIM Cooker Hood - Stainless Steel1 x ZAC- 450 -4-11 x CBB-80N Centrifugal1 x Pre 10:30 Delivery Surcharge1 x Hydor HPA315/4-1A1 x Etaline 200 - EC1 x Soler & Palau - HCBT/6-630/H - IP651 x Helios GigaBox 560mm GBD 560/6/6 centrifugal1 x Metal Inline Fan - VENT-315NK1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x Access Door for Circular Duct - 300 x 200 - SIZE 501 x Soler & Palau TCBT/6-710/L - IP651 x Soler & Palau - HXBR/4-315/H - IP541 x Elta SPA450/46-3AC - IP541 x Purlin Box 800 for RAW Cowls1 x Etaline 200mm1 x Elta Unpodded Silencer 1D-800mm1 x 204x60mm Equal T Piece1 x HCFT/4-630mm plastic impeller plate fan1 x Soler & Palau - HCBT/4-355/H - IP651 x CMB-2-140-050 0.25Kw LG O1 x Metal Inline Fan - VENT-250NK1 x Etaline 315mm - E2 03 (Low Power Version)1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x Elta Unpodded Silencer Melinex 1D-500mm1 x Soler & Palau - HXBR/4-250/H - IP441 x TD6000 Mixvent - 400mm1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Plastic Kitchen Extractors - CK40F
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...