• UPC/EAN:8413893271631
  • Model:SWF-150

SWF-150 Sidewall Mounted Extractor Fan

£ 368.04 (excl. VAT)

£ 441.65 (inc. VAT)

Range of direct drive externally mounted centrifugal fans, manufactured from high grade pressed galvanized steel protected against corrosion by polyester paint finish. All the fans are provided with a removable top for easy access to motor for cleaning or inspection, a large grille opening, a back-draft damper, a pre-wired terminal box and a backward curved centrifugal impeller.
All the motors are single-phase 230V - 50Hz, IP44, Class F, with ball bearings greased for life, and safety thermal overload protection of manual reset type.
The SWF series is ideally suited for a wide range of residential, commercial and industrial exhaust ventilation applications where the fan needs to be mounted externally.

The Sidewall Fan Series (SWF) of direct drive centrifugal ventilation fans consists of five model sizes ranging from 4-8. All models are designed for direct connection in-line with standard diameter round ducting. Airflow performance values range from 165M3/h(119 CFM) up to 770M3/h (416 CFM).

All SWF series models incorporate a powerful external rotor motor that has been factory matched to a nonoverloading backward curved centrifugal fan wheel. This powerful combination enables the SWF to deliver exceptional airflow performances against high static pressure typically found in ducted ventilation systems. All motors within the SWF series are fully speed controllable using voltage or frequency control regulators.

The SWF series has been designed for easy through the wall installation. The totally enclosed motor design allows for the SWF to operate in high moisture, lint and dust laden air, Perfect for kitchens, bathrooms and utility rooms. All models are manufactured with high quality materials and workmanship that is supported by a comprehensive five (5) year warranty.

The SWF series features a corrosion resistant galvanized steel casing with a baked enamel coating that can be painted to match the exterior wall. The unit also includes a built-in backdraft damper and an extended opening exhaust grille. The larger grille allows for the easy exhaust of dirty or lint laden air while the spring-loaded backdraft damper helps prevent insects, etc. from entering duct work.

The SWF150 fans feature Class F Motor Insulation making them the ideal fans for Clothes Dryer Boosting applications. Built-in Spring-loaded Backdraft Damper Supply/Exhaust for ducts SWF-SIDEWALL Warranty Five (5) year limited warranty.

Casing
• Externally mounted
• Manufactured from high grade pressed galvanized steel, with baked enamel coating.

• Removable top for easy access to motor for cleaning or inspection.

• Large grille opening for easy passing of lint and other potentially clogging materials.

• Includes prewired terminal box.

Wheel/Impeller
• Backward curved centrifugal type.

• Factory matched to an external rotor motor and dynamically balanced to eliminate vibration.

Accessories
• A wide range of accessories are available to complete the most demanding installation.



Model ------ (m3/h) ----- (dB(A))
SWF-150 --- 485 ---------- 58
PDF Files


SWF Series

1 x Female Ducting Connector - 355mm1 x Impeller Side Guard - 560mm1 x 204x60mm Rectangular to 100mm Round Adaptor1 x CBMT/Q 315-30 1 HEATER KIT1 x B-flow Impeller HCBB/T-560mm1 x Ancillary Pack for SB-Biflow 315 model1 x CBS-60 Outlet Flange for CSB/CBT-601 x SDD-U Anti Vibration Pads1 x CBMT/Q 250-54 1 HEATER KIT1 x MTS10- extractor fan 3 step switch1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x 110 x 54mm Flat Channel Connector1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x SG AW 1000 Guard 6 (GFC)1 x HCFT/6-800-H plastic impeller plate fan2 x BDS 500/560 RA b/d shutter1 x Elta Standard Ambient Flexible Connector - 560mm1 x Impeller Side Guard - 500mm1 x Purlin Box 300/315 for RAW Cowls1 x TD Mixvent 1100/250 EEXEIIT31 x DT-1 Duct Mounted Thermostat1 x 220x90mm Double Airbrick Adapter2 x Elta SCP315-1EC - IP551 x Isolator Switch - ISOSW1 x MPS Weather Housing1 x Spiral Ducting 3 Meters - 100mm1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x CBS-80 Outlet Flange for CBT-801 x ECS25/400 ECS25/400 SPRING A/V MOUNT1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x Commercial Thermostat - TH161 x Access Door 400mm x 400mm1 x Purlin Box 200/250 for RAW Cowls1 x Elta Unpodded Silencer Melinex 1D-560mm1 x Bell Mouth Inlet for Elta cased fans - 800mm1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Acoustic MiniBox Fan - MINI-BOX 2501 x Impeller Side Guard - 400mm1 x Spiral Duct Grille Termination - 630mm1 x DEF-900AN2 x Chaysol Da 12/9 CMAL - 736W 6 Pole - Closed Motor - Single Phase1 x Ancillary Pack for SB-Biflow 500 model1 x Acopel F400-120/1601 x ERR 20/1 Centrifugal inline fan1 x MUB/T 042 500 D4 Centrifugal box fan, 120°C Continuous, Insulated1 x Elta Wall Cowl SWC45/501 x Versio Square Ceiling Diffusers - RS141 x Mounting Feet (pair) for SB-CON 4001 x Acopel F400-900/1802 x HR200WK single room heat recovery unit1 x Flanged Spigot - 400mm1 x Acopel F400-250/1601 x Rectangular Airbrick Adaptor1 x CBA-130 Inlet Flange for CBT-1301 x Mounting Feet (pair) for SB-CON 3151 x Access Door for Circular Duct - 500 x 4001 x Spigot plate - 630mm1 x MUB/T 062 630 D4 Centrifugal box fan, 120°C Continuous, Insulated1 x Jetflow-HIT Metal inline - 200mm1 x Male Ducting Connector - 315mm1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x BDS 400/450 RA b/d shutter1 x GB-WSD 450 Weather Protection hood for the Giga-Box Fans - 450mm1 x BDS 300/315 RA b/d shutter1 x ILTM-500/560/630 - Motor Cover for ILHT Fans - 51337593001 x Elta Variable Speed Drive IP66 - 7.5KW1 x DA12/12 Feet1 x CBMT/Q 125-12 1 HEATER KIT1 x Anti Vibration Duct Suspension Rings - 355mm1 x AC03TO-ADS-VFS-EN-9A (Three Phase)1 x Chaysol da 9-7 - V7099331 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x GB-KW 355 Drain pan for Giga Box Fans - 355mm1 x DA 7-7 72w 6P VR1 x Elta Wall Cowl SWC35/401 x Mounting Feet (Pair) for SLC-900-060B-09001 x Purlin Box 630/710 for RAW Cowls1 x Impeller Side Guard - 630mm1 x Access Door for Circular Duct - 250 x 150 - SIZE 152 x FSD-TD 600 x 600 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Stainless Steel Single Blade Regulating Damper -150mm1 x Elta Standard Ambient Flexible Connector - 500mm1 x Elta SCP400/4-3AC - IP551 x Elta Standard Ambient Flexible Connector - 250mm1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x Gorilla HVLSX401 x DEF-1000-AN1 x Frequency converter RUCK - FU 075 211 x Spiral end cap - 300mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x CCpro 40 (1CC9402) Long Casing Extension1 x Elta Turboflow-TF - 500mm(A) - Three phase1 x PML230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/6-15000/710 ND - Pack 101 x CBS-130 Outlet Flange for CBT-1301 x DV-ROF-V-315 Roof mounted unit1 x B-flow Impeller HCBB/T-450mm1 x Chaysol DA 12/12 CMAL - 1100W 6 Pole - V727200381 x 220x90mm 45 Degree Horizontal Bend1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-12000/560 ND - Pack 51 x Purlin Box 500/560 for RAW Cowls1 x Helios GigaBox 450mm GBD 450/4/4 centrifugal1 x Soler & Palau - HCBB/4-630/H -IP651 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x DA 15/15 Feet1 x TecFire Intumescent Damper - Rectangular 300x300mm1 x HR-500 DP Heat Exchange Unit1 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x MUB 062 630D4 Multibox1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Inclined Kurb support for CTHB/6-4001 x Elta Standard Ambient Flexible Connector - 350mm1 x NKS-D swirl diffuser v-300 x 300mm1 x FSAF450C1DA Silencer 500/81 x Ducting 15 Degree Bend - 315mm1 x Chaysol Da 10-10 - 550watt 6p Enclosed Motor1 x DA10/10 Feet1 x 150mm - 200mm Round Reducer1 x Soler & Palau - HXTR/4-315/H - IP541 x CBA-60 Inlet Flange for CBT-601 x Duct Fast Clamps - 125mm1 x SQUARE MIXED FLOW FAN - MFQ 560mm (Three Phase)1 x CS2 Current Switch1 x Ducting Y Piece - 250mm1 x DA12/9 Feet1 x Ducting Y Piece - 100mm2 x Helios GigaBox 630mm GBD 630/6/6 centrifugal2 x Etaline 400mm D2-01 3-phase2 x 220x90mm 45 Degree Vertical Bend1 x Ducting 90 Degree Bend - 125mm1 x 125mm - 150mm Round Reducer1 x Helios GigaBox 560mm GBD 560/4/4 T120 centrifugal1 x Flexible PVC Ducting - 15 Mtr2 x Spiral Ducting 1 meter - 710mm1 x Chaysol DA 9/7 245W 6P VR1 x HCFT/4-800mm plastic impeller plate fan1 x Acopel F400-710/1801 x Ducting 45 Degree Bend - 80mm1 x Raptor SDA560/6-1AC1 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x HCFB/4-630mm plastic impeller plate fan1 x Thermostat - Adjustable Room Thermostat - 230V1 x Raptor SDA560/4-1AC1 x Flanged Spigot - 630mm1 x Metal Inline Fan - VENT-355N1 x 100mm Round Connector1 x Elta SPA630/4-3EC - IP541 x 220x90mm Rectangular to 150mm Round Adaptor1 x KV DUO 250 EC1 x K 250 L Sileo
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...