• Model:HR100-R

HR 100 R Single Room MVHR

£ 289.18 (excl. VAT)

£ 347.02 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100R features top access and is ideal for loft installations.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 370377
PDF Files


Data Sheet

Available Options

1 x Helios TSW MCB Amp Transformer speed controller1 x Helios HQW-630/4 - IP551 x REB-CVF 0-10v Controller1 x Speed Controller - REB2.5-N1 x Mini Diffuser - 100mm1 x 110 x 54mm Round to Rectangular Adaptor - Long2 x HIMF - Mixed Flow Fan 125mm Inline Fan3 x CBT-130N Centrifugal3 x Vent Axia T-Series Wall Model TX9WL1 x Flat Roof Terminal -OFT 5 - Asphalt3 x DDMP 12-12 3F 5700W M6M0 DG71 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting2 x Helios SVR EC 160 B – SlimVent Centrifugal Fan Box3 x Duct Termination with Mesh - 150mm1 x CBS-100 Outlet Flange for CBT-1001 x TUNE-R-160-3-M2 - Control Damper2 x DDMP 12-09 1F 1800W M6A4 DA83 x Elta SCP500/4-1AC - IP553 x 125mm Round Connector with Damper3 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit2 x ELTA - Three Phase Transformer 3amps1 x Vent Axia T-Series Wall Model TX6WL2 x DDMP 09/07 Mounting Flange3 x Chaysol DA 9/9 3 speed4 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x Manrose Window Extractor - WF150AP2 x DDMP 10-08 FLANGE2 x TUNE-R-250-1-M1 - Control Damper2 x CBM 9/7 4p 420W RE-VR3 x VA 9/2 T - High Temp Axial Fan,2 x Universal Pipe Fixing Clip2 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x RUCK MTP 20, 10K, Speed control1 x DS-2/2 2-Speed Switch IP54 (Single Phase)2 x Helios PA10 Speed Potentiometer3 x DPD 12PM Delivery Surcharge1 x Spiral end cap - 355mm1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x ELTA - Single Phase Transformer 2amps3 x Duct Termination with Mesh - 450mm1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x DDMP 10-08 1F 1000W M6A2 DA51 x CBB-80N Centrifugal3 x MEV Spider Additional Spigots1 x Duct Termination with Mesh - 250mm1 x SPI-200 C Iris damper1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase2 x Helios VARW 450/4 - TK1 x EM30-24 Control Panel Commissioning Service1 x DDMP 12-12 1F 1800W M6A4 DA81 x Duct Termination with Mesh - 400mm
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...