• Model:HR100-R

HR 100 R Single Room MVHR

£ 289.18 (excl. VAT)

£ 347.02 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100R features top access and is ideal for loft installations.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100R is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 370377
PDF Files


Data Sheet

Available Options

1 x 100mm Wall Duct - 350mm1 x Elta SLC500/2B-3AC - IP551 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x FU 22 25 Frequency Inverter1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 2 Amps1 x Elta SCP500/4-1AC - IP551 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x 1mtr Insulated Round Ducting - 125mm1 x 125mm Insulated 45 Degree Bend1 x Speed Controller - REB11 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Soler & Palau - HCBT/6-500/H - IP651 x 150mm Round Connector1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x Male Ducting Connector - 160mm1 x 204x60mm 45 Degree Horizontal Bend1 x Spigot plate - 560mm1 x 150mm Round 90 Degree Bend1 x Duct Suspension Rings - 150mm1 x Metal Inline Fan - VENT-150NK1 x 204x60mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Spiral Ducting 1 meter - 160mm1 x Metal Inline Fan - VENT-200NK1 x Spiral Ducting 1 meter - 355mm1 x Purlin Box 630/710 for RAW Cowls1 x 150mm Round Equal T Piece1 x Stainless Steel Male Connector - 150mm1 x Stainless Steel Male Connector - 500mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 200mm1 x Stainless Steel IL Flanged Spigot-400mm1 x Spigot plate - 150mm1 x Stainless Steel Male Connector - 400mm1 x Access Door for Circular Duct - 250 x 150 - SIZE 251 x Ducting 90 Degree Bend - 315mm1 x Stainless Steel Jet Cowl Ventilation Outlet - 100mm1 x Spiral Ducting 3 Meters - 315mm1 x Flanged Spigot - 125mm1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Stainless Steel Jet Cowl Ventilation Outlet - 630mm1 x Stainless Steel Single Blade Regulating Damper -200mm1 x Etaline 150mm - EL 150L E2 011 x Stainless Steel Jet Cowl Ventilation Outlet - 400mm1 x Stainless Steel Male Connector - 315mm1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Duct Mounted Filter Box - G4 Grade Panel - 150mm1 x Helios Condense Collector1 x Helios VDS-7 Three Phase Transformer 5-Step1 x RTRD - Three Phase Speed Controller - 4 Amp1 x FU 15 40 Frequency Inverter1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x RDS 2 Helios Transformer Controller With Motor Protection1 x FU 15 16 Frequency Inverter1 x Kitchen Grease Filter - Mesh Type Non standard : 381 x 355 x 47mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...