• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x Direct Saturday Delivery Surcharge1 x AW Sileo EC Plate Axial Fan - Three Phase - 630mm1 x EnergiSava 210 Low Energy Heat Recovery Unit1 x Duct Fast Clamps - 150mm1 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)1 x Additional Delivery Surcharge1 x Raptor SDA350/4-1EC1 x External weather louvre 500w x 500h - WL501 x Classic SAX30/12AR Window/Wall Mounted1 x Female Ducting Connector - 150mm1 x ZAC- 350 -4-11 x Direct AM Delivery Surcharge1 x Elta Wall Cowl SWC35/401 x *VORT HRW 30 MONO Evo HCS - Single Room Heat Recovery Unit,1 x HCFB/4-400mm plastic impeller plate fan1 x Northern Ireland Surcharge1 x Female Ducting Connector - 160mm1 x Impeller Side Guard - 500mm1 x AM pallet Delivery Surcharge1 x Impeller Side Guard - 800mm1 x Elta SPA630/4-3EC - IP541 x HRT/4-630/25-BPN E221 x Male Ducting Connector - 150mm1 x HRB/6-630-25-BPN1 x Classic SAX23/9ARB Wall Mounted1 x AKOR T3/7 Spare Motor1 x Spigot plate - 80mm1 x Soler & Palau - HXTR/6-800/H - IP541 x Raptor SDA350/4-1AC1 x DEF-CBM-RE-7 - Protection Guard1 x FedEx Midday Delivery Surcharge1 x GXC9 - High Performance Extract Fan1 x KRJ - 225 Inlet Guard1 x AR Sileo 500 Cased Axial Fan Guard - SG AXC/AM/AR 5001 x Spiral Ducting 1 meter - 150mm1 x Elta SCP630/4-3AC - IP551 x Elta SPA630/68-3AC - IP541 x Soler & Palau - HCBT/4-800/L-AX - IP551 x AKOR Spare Filter1 x Pre 12:00 Delivery Surcharge1 x Helios VARD 355/2/2-TK1 x Elta Wall Cowl SWC56/631 x F7/G4 filter kit for IDEO HR unit1 x European Pallet Delivery Surcharge1 x Elta SCP400-1EC - IP551 x EBB-250 S DESIGN Centrifugal Extractor Fan
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...