• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x HXP560/6-3 - 6 Pole - Three Phase1 x EC6H - Reversible Group Fan Electronic Controller1 x Helios GigaBox 630mm GBD 630/4/4 centrifugal1 x CBM 10/8 6P 245W RE VR1 x Belt Drive Cased Axial Fan - 800mm - L version1 x CBMT/Q 200-54 1 HEATER KIT1 x ELTA - Single Phase Transformer 10amps1 x Helios VARW 450/4 - TK1 x Metal Inline Fan - VENT-250NK1 x Belt Drive Cased Axial Fan - 450mm - L version1 x Atex Inline Fan 180mm - ERM18EXE1 x CBMT/Q 125-12 1 HEATER KIT1 x Belt Drive Cased Axial Fan - 450mm - H version1 x CBM 12-12 1100w 6P Three Phase1 x CBMT/Q 500-17 3 HEATER KIT1 x Soler & Palau - HCBT/6-560/H - IP651 x Raptor SDA450/6-1AC1 x AirTrak Heater-315mm1 x TD Mixvent 1200/315 EEXEIIT31 x HCFT/4-560mm plastic impeller plate fan1 x Duct Termination with Mesh - 710mm1 x CBT-170 Centrifugal1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Raptor SDA350/4-1EC1 x CBT-125 Centrifugal1 x AXCBF 250D2-32 Bifurcated Axial Fan1 x Spiral Ducting 1 meter - 160mm1 x F7/G4 filter kit for IDEO HR unit1 x GB-WSD 500 Weather Protection hood for the Giga-Box Fans - 500mm1 x Spiral Duct Grille Termination - 160mm1 x SPI-250 C Iris damper1 x HXP500/4-3 - 4 Pole - Three Phase1 x EZQ 20/2 B - High Performance Plate Axial Fan1 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x HRB/4-500-25-BPN1 x HD-LL Series 600x6001 x 125mm Wall Duct - 350mm1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x AMD 355/2/2 High Pressure Long Cased Axial Fan1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...