• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x Acopel F400-200/1601 x Elta Standard Ambient Flexible Connector - 1000mm1 x Acopel F400-560/1601 x MTS10- extractor fan 3 step switch1 x MVEx 1,0 Atex Motor Protection Switch1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Flexible PVC Ducting - 204x601 x Manual Overide Switch - MOS1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Flanged Spigot - 500mm1 x 7-Day Digital Time Switch - TCK7D-6A1 x Two Speed Switch - REGUL-21 x Acopel F400-355/1601 x Stainless Duct Delivery Charge (Standard 2 x 1.5m)1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Acopel F400-710/1801 x Acopel F400-500/1601 x HV Wall Mounted Belt Drive Fan 1000mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x OZEO E ECOWATT Wireless Switch - OZEO-ECO-W1 x EM 250-E2M 01- Etamaster-2501 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x HV Wall Mounted Belt Drive Fan 1500mm 400V / 50Hz 1.5kW - Three Phase1 x 125mm Round Condensation Trap1 x Remote Indicator RED/GREEN - AM121 x Spigot plate - 315mm1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/4-12000/560 ND - Pack 81 x Spiral Duct Grille Termination - 315mm1 x High Temperature Flexible Connector - 063-0315-PU2501 x Elta Standard Ambient Flexible Connector - 315mm1 x Elta Standard Ambient Flexible Connector - 900mm1 x Acopel F400-225/1601 x AIRVENT speed control - AIR4019611 x FM-150 Flexible Connector Sleeve - 150mm1 x Soler & Palau TCBB/4-560/H - IP651 x JAE- 560 Flexible Coupling for CRHB/CRHT Roof Fans1 x DPD SAT Delivery Surcharge1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Kitchen Grille with Grease Filter - 300x300 - NO GRILLE BOX1 x Elta Standard Ambient Flexible Connector - 630mm1 x Elta Standard Ambient Flexible Connector - 560mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...