• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x BDRAX 250-E2 Cased Axial External Rotor Fan1 x AMD 250/4 - Medium pressure axial fan 3-PH 400 V1 x Ducting 90 Degree Bend - 100mm1 x Spiral Ducting 1 meter - 630mm1 x Ducting T Piece Equal - 630mm1 x AL 400 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x CHGT/4-630-6/-3KW- AXIAL FLOW CABINET FANS1 x Elta SLC400-1EC -IE5 Motor- IP551 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT350/4-3AC1 x CC-SHT 504 (C-Version)1 x Elta Cased Axial Flange - 630mm1 x Raptor SDA400/4-1EC1 x SLC040J2-A6/21 - High Performance Long Cased Axial Fan1 x Soler & Palau TCBB/6-400/H - IP441 x Duct Termination with Mesh - 355mm1 x Biflow SB315-CON4-1 - High Temperature Bifurcated Fan1 x AMD 400/2/2 High Pressure Long Cased Axial Fan1 x Soler & Palau TCBB/4-250/H - IP541 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 630mm1 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x Ducting 45 Degree Bend - 355mm1 x Bifurcated Fan - TET 4/6001 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x Elta Cased Axial Flange - 500mm1 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x Bifurcated Case Axial Fan 315mm (BIFA)1 x CHGT/4-800-9/-7.5KW- AXIAL FLOW CABINET FANS1 x CRBB/4-400/J ML UL1 x Bifurcated Long Cased Axial Fan - 630-2-3ph1 x LCA403218 - Long Cased Axial Fan1 x Soler & Palau TCBT/4-400/H - IP441 x CC-SHT 1004 (5.5kw)1 x AMD 250/2 - Medium pressure axial fan 3-PH 400 V1 x Bifurcated Fan - TET 4/4001 x Elta Turboflow-TF - 560mm - Three phase1 x HV Wall Mounted Belt Drive Fan 1250mm 220V to 240V / 50Hz 1.1kW - Single Phase1 x Elta Qube SQU Centrifugal Box Fan - SQU23/4-3HTS - Three Phase1 x Elta SLC900/4B-3AC - IP551 x Etaline 500mm - D4 01 3 Phase1 x 220x90mm x 1m Low Profile Plastic Ducting - 1 Meter1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Ancillary Pack for SB-Biflow 315 model1 x Classic SAX23/9A Window/Wall Mounted1 x KVK SLIM 200 EC - Centrifugal Circular Duct Fan1 x Male Ducting Connector - 100mm1 x Spiral Duct Grille Termination - 250mm1 x KV DUO 400 EC1 x Ducting 90 Degree Bend - 200mm1 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)1 x Ancillary Sealing Band - 200mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...