• Model:HR100-RS

HR 100 RS Single Room MVHR

£ 353.68 (excl. VAT)

£ 424.42 (inc. VAT)

The HR100R and HR100RS are ideal for single bedroom/bathroom applications such as hotel rooms, nursing homes and residential care homes.

The HR100RS features bottom access and is ideal for installation on the ceiling slab above a suspended ceiling.

The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control.

An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity.

Up to 18 l/s FID capacity (extract airflow). The unit provides superior control of condensation and odours. Suitable for use in bathrooms or small internal rooms.

Installation
The HR100RS is compatible with 100mm diameter flexible ducting which fits onto the unit via the metal spigots and can be fastened using worm drive clips.

A 22mm diameter condensate drain connection is situated on the base of the unit, this should be connected to a suitable outlet for condensate drainage.

P/N 435004
PDF Files


Product Sheet


Instructions

Available Options

1 x Elta Turboflow-TF - 500mm(A) - Three phase1 x EBB-250 T DESIGN Centrifugal Extractor Fan1 x Ducting 90 Degree Bend - 630mm1 x Soler & palau TCBT/2-250/H - IP441 x Elta Turboflow-TF - 450mm - Three phase1 x Curved boot - 630mm1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x Spiral Duct Grille Termination - 630mm1 x EBB-250 M DESIGN Centrifugal Extractor Fan1 x Bathroom Fan -Envirovent- Silent 100 S (Standard Model)1 x FU 075 52 Frequency Inverter (IP20)1 x Ducting T Piece Equal - 630mm1 x Duct Termination with Mesh - 200mm1 x Elta Turboflow-TF - 450mm - Single phase1 x Helios GigaBox 630mm GBD 630/4/4 centrifugal1 x Soler & Palau - TGT/6-1000-3/26 BLP 3kW (230/400V50Hz) IE3 V51 x 220x90mm 45 Degree Horizontal Bend1 x Raptor SDA450/4-1AC1 x 220x90mm Mounting Clip (Individual)1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Spigot plate - 630mm1 x ARIETT I - Centrifugal Bathroom Fan1 x Metal Inline Fan - VENT-200NK1 x Ducting Y Piece - 100mm1 x Raptor SDA630/4-1EC1 x Ducting Reducers Short - 315mm-200mm1 x Duct Mounted Filter Box - G4 Grade Panel - 250mm1 x EQ641406 630mm Max Fan1 x CADB/T-HE 54 ECOWATT Series1 x AW Sileo EC Plate Axial Fan - Three Phase - 1000mm1 x BF VVX-200 - Villavent Filter1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Spiral Ducting 1 meter - 315mm1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 400mm1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator1 x Elta SLC560/4B-1AC - IP551 x Jetflow-HIT Metal inline - 200mm1 x BD7/7 centrifugal M4 0.13Kw - Galvanised Impeller - MBI Assembled1 x Elta Standard Ambient Flexible Connector - 350mm1 x CBB-80N Centrifugal1 x Soler & Palau TCBT/6-630/H - IP651 x Etaline 200 - EC1 x Purlin Box 500/560 for RAW Cowls1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Duct Termination with Mesh - 355mm1 x ELM 25 EX Flexible Cuff for ERM 2501 x CBT-80N Centrifugal1 x Duct Mounted Filter Box - 500mm - M6 grade Bag filter1 x CBP-DC 15/151 x CBM 12/9 515W RE-VR1 x Pre 12:00 Delivery Surcharge1 x Ducting 90 Degree Bend - 100mm1 x Elta Turboflow-TF - 630mm - Single phase1 x Acopel F400-200/1601 x Time Delay Unit - DT20B
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...