0-10v Fan Speed Controller - EFSC 0/10

The EFSC 0/10 is a 240-volt Fan Speed Controller available in either 6.0 or 10.0Amp; suitable for 2 or 3 wire control of single-phase speed controllable motors. The unit can be controlled from a remote 0-10 volt dc input voltage (from a BMS system or sensor). Alternatively the control could be from a remote 10k potentiometer. The controller can be switched on and off with a remote volt free switch, this remote switch would operate a power relay within the controller breakingthe incoming live supply. The unit is housed in a plain grey ABS plastic enclosure. This model is fully suppressed to EN55014 and is also suitable for resistive lighting loads.

Specification
• Supply: 220-250V 1PH 50/60Hz
• Output load: 6 amps or 10 amps max (fan loads or resistive lighting loads)
• DC Input: 0-10V dc (0V in=min level out, 10V in=240V out)
• Input impedance: 100K
• EMC suppressed to EN55014
• Enclosure: grey ABS (200mm x 155mm x 80mm)