• Model:RD25

Access Door 250mm x 250mm

£ 23.79 (excl. VAT)

£ 28.55 (inc. VAT)

The Lindab range of RD Series access doors isdesigned to provide rapid access to smoke, fire andvolume control dampers or other equipment mountedinside ductwork or associated plant. All door panels are ofdouble skin construction completely enclosing the 25mmthick high density insulation. Features The RD Series of rectangular doors provide a number of unique advantages:-• All doors are manufactured using C.N.C plant whichensures close fit tolerances and repeatable qualitydoor after door.• Fixing tabs have rounded edges to reduce thepossibility of fitters & inspection engineers sufferingcuts.• Camlocks & strike plates are manufactured from heavygauge steel, zinc plated to prevent twisting anddeformation.• Every door is fitted with two gaskets, one between doorand frame and a second on the back face of the frameto ensure a good seal between frame and ductwork.• High quality gaskets used throughout.• High density insulation.• Independently tested at BSRIA.TechnicalThe RD Series of rectangular access doors have beensuccessfully independently type tested by BSRIA forcompliance to HVCA standard DW144. The products weretested to Class C with a maximum operating pressure of2000 Pa positive and 750 Pa negative.Copies of the complete BSRIA report No 15653/4 areavailable free on request. RD doors comply fully with DW144 specification.Product DataOptions• Stainless steel doors and frames.•50mm thick insulated doors.• Piano hinge on one edge when hinged doors arerequired, product reference RDH.• Safety chain between door and frame, product referenceRDSC.• Other sizes to special order.SpecificationCCL RD doors and frames are manufactured fromcorrosion resistant galvanised steel and fitted with steelzinc plated camlocks and hooks. Gaskets are fitted to bothfaces of the frame.The door panels are filled with high density insulationmaterial.Installation1. Cut a hole in duct 30mm under nominal panel size.2. Ensure that the hole is square and that the duct isadequately stiffened to prevent panting.3. Offer access door subframe into aperture and knockover edge tabs whilst supporting the subframe firmlyonto the duct. Ensure that alltabs are knocked over andthat the sealing gasket is under compression on all facesincluding corners.4.Mount doors into frame and tighten camlocks - do notover tighten.
1 x Duct Termination with Mesh - 450mm2 x Spiral Duct Grille Termination - 450mm1 x Spiral end cap - 450mm1 x Spiral Ducting 3 Meters - 450mm1 x Ducting 45 Degree Bend - 450mm1 x Pressed Ducting Saddle - 450mm1 x GXC6EC - High Performance Extract Fan2 x Curved boot - 450mm1 x Systemair ZAP- 4pole - Three phase -450mm - IP541 x Ducting 90 Degree Bend - 450mm1 x Elta SPA400/4-1AC - IP541 x Elta SCP250/4-1AC - IP551 x Impeller Side Guard - 450mm1 x HRT/6-630/30-BPN1 x Helios HQW-630/4 - IP551 x Impeller Side Guard - 250mm1 x Classic SAX23/9ARB Wall Mounted1 x KRJ - 225 Inlet Guard1 x TX12PL Panel unit1 x FU 22 04 Frequency Inverter1 x Impeller Side Guard - 400mm1 x Impeller Side Guard - 1000mm1 x Helios HQW-250/2 - IP551 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX355/4-3 Three Phase1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase1 x Raptor SDA350/4-1AC1 x Elta SPA630/46-3AC - IP541 x GB-WSG 630 External Weather Louvers for the Giga-Box Fans - 630mm1 x Soler & Palau - HCBB/6-630/H - IP651 x Elta SCP250-1EC - IP551 x Stainless Duct Delivery Charge (Standard 2 x 1.5m)1 x FedEx Midday Delivery Surcharge1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Female Ducting Connector - 630mm1 x AXC 355-6/19°-2(B)-P (0.75 kW) - Smoke Extract Fan1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Ducting 45 Degree Bend - 630mm1 x HRFD 400/4 EX Atex Rated 400mm Cased Axial Fan 400v1 x ACCESS DOOR FOR CIRCULAR DUCT 180 X 180 -- 100/1251 x Duct Split Rings (Pair) -630mm1 x Access Door 200mm x 200mm1 x Belt Drive Cased Axial Fan - 710mm - L version1 x Access Door for Circular Duct - 500 x 4001 x Elta SLC630/4A-3AC - IP551 x Access Door for Circular Duct - 300 x 200 - SIZE 401 x Access Door for Circular Duct - 250 x 150 - SIZE 251 x KABT/4- 9000/5001 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Biflow SB250-CON2-3 - High Temperature Bifurcated Fan1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Access Door for Circular Duct - 300 x 200 - SIZE 35
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...