• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Spiral Ducting 1 meter - 400mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x 204x60mm 45 Degree Vertical Bend1 x Ducting 90 Degree Bend - 560mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x TD160 Mixvent - 100mm - TD160-N Standard1 x Soler & Palau - HXTR/4-450/H - IP541 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Duct Fast Clamps - 250mm1 x ELTA - Three Phase Transformer 3amps1 x Transformer 5 Speed Controller - ATC1-12TK1 x Flanged Spigot - 150mm1 x Round ceiling diffuser 300mm1 x 150mm Round Connector1 x 100mm Round Wall Plate1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 4501 x 125mm Wall Duct - 350mm1 x MTS10- extractor fan 3 step switch1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 110 x 54mm Flat Channel Connector1 x Flanged Spigot - 80mm1 x Spiral end cap - 80mm1 x Ducting Y Piece - 100mm1 x Male Ducting Connector - 250mm1 x Miniflow SMF Horizontal Roof Cowl SMF20/301 x Spigot plate - 450mm1 x Flanged Spigot - 100mm1 x 125mm Round Wall Plate1 x 125mm Round Condensation Trap1 x Roof Axial Cowl - RAW10001 x Jetflow-HIT Metal inline - 125mm1 x FlameProof Plate Axial Fan - Single Phase - 12 inches - Eexd IIC T4 -4pole1 x Ducting 90 Degree Bend - 250mm1 x 204x60mm Equal T Piece1 x Spiral Rapid Lock Clamp - 250mm1 x Ducting 45 Degree Bend - 560mm1 x 1mtr Insulated Round Ducting - 125mm1 x AW 650 D6-2-EX Explosion Proof Axial Fan - ATEX1 x Versio Square Ceiling Diffusers - RS141 x Circular Ceiling Diffuser - TST 1601 x PCA Diffuser - PCA-3151 x Three Phase ATEX Compact axial fan - 355mm - compactA3ATE1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...