• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 331.03 (excl. VAT)

£ 397.24 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Elta 10 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 2amps2 x Electronic extractor fan speed controller - FSC 1.51 x EC6H - Reversible Group Fan Electronic Controller1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Elta 2 Amp Electronic single phase speed controller.1 x Elta 3 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 8amps1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x EFSC-3N- Single Phase Speed Control1 x Helios TSW 1.5 Amp Transformer speed controller1 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 12amps1 x COM-31 x ELTA - Single Phase Transformer 4amps1 x AIRVENT speed control - AIR4019611 x EFSC-6N- Single Phase Speed Control1 x ELTA - Single Phase Transformer 10amps1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x EC-Vent control board1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x EM30-24 Electro-Mechanical Control Panel1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Elta ACO Panel 149-ACO18B1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Systemair Save Connect 2.0 Internet Module1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x GRA-100 External Grill by S&P1 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC25/311 x Elta Wall Cowl SWC45/501 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Jet Cowl - 315mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Mini Diffuser - 100mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer 5 Speed Controller - ATC1-4TK1 x Vent Axia ACM 150 inline mixed flow duct fan1 x DEF-140T Inlet Guard for the CBT-100N1 x TG-K Duct temperature sensor1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Elta 3 Amp Electronic single phase speed controller with TK1 x Envirovent G4 Filter - SL-G4/F71 x MWS 1.5 – Transformer Controller With Motor Protection1 x Vent Axia T-Series Controller1 x Remote Timer Control - 13511 x Transformer (silent) speed controller - RE 3.0 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB51 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Transformer (silent) speed controller - RE 5.0 Amp1 x Speed Controller - REB1-N1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x REB-CVF 0-10v Controller1 x MTP 10, 10K, Speed control1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Transformer Speed Control - RTRE- 1.5Amp1 x Speed Controller - REB1
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...