• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Helios GigaBox 560mm GBD 560/4/4 T120 centrifugal1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Metal Inline Fan - VENT-160NK1 x Duct Termination with Mesh - 630mm1 x Ducting 45 Degree Bend - 630mm1 x USD-3000 Rect to Circ coupling Flange For KABB/T kitchen fans1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Soler & Palau - Contra Rotating TCBTx2-450 - IP651 x Spiral Ducting 1 meter - 100mm1 x ELTA - Single Phase Transformer 12amps1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 -2pole1 x MV EC 100 Multivent1 x DDMP 07-07 1F 1100W M6AO DA51 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x Three Phase ATEX Compact axial fan - 400mm - compactATEX71 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Metal Inline Fan - VENT-125NK1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 420mm1 x Three Phase ATEX Compact axial fan - 560mm - compactATEX51 x ELTA - Single Phase Transformer 4amps1 x Anti Vibration Duct Suspension Rings - 400mm1 x FlameProof Plate Axial Fan - Single Phase - 12 inches - Eexd IIC T4 -4pole1 x KBA- Inlet Mounting 2801 x Transformer (silent) speed controller - RE 1.5 Amp1 x Trickle And Boost controller for use with the SLP EC Slimpak fans1 x DDMP 12-12 FLANGE1 x CBA-60 Inlet Flange for CBT-601 x TLZ 450 R - A Outlet Mounting Flange1 x USD-12000 Rect to Circ coupling Flange For KABB/T kitchen fans1 x Spiral Ducting 3 Meters - 400mm1 x KBA- inlet mounting flange for CRMT 2501 x KBD- outlet mounting flange for CRMT 2501 x Duct Split Rings (Pair) -630mm1 x Casals Circular Outlet Connection Flange - 5102018031 x Speed Controller - REB61 x AIRVENT speed control - AIR4019611 x MTV-1/010 Controller 0 to 10V+1 x KBD- outlet mounting flange for CRMT 3151 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Elta 3 Amp Electronic single phase speed controller.1 x Elta Cased Axial Flange - 250mm1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Elta SCP630/4-3AC - IP551 x Electronic extractor fan speed controller - FSC 1.51 x RUCK MTP 20, 10K, Speed control1 x FU 075 03 Frequency Converter (IP55 Version)1 x Potentiometer EGH 01 - for DDMP Fans1 x Elta EC Electronic Controller1 x Spiral Ducting 3 Meters - 300mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...