• UPC/EAN:8413893602077
  • Model:CAB-100

Acoustic Box Fans (Inline) - CAB-100

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 194.4 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113862300

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Acoustic series Data Sheet


CAB-100 Data Sheet

1 x Purlin Box 500/560 for RAW Cowls1 x 125mm Round Wall Plate1 x Inclined Kurb support for CTHB/6-4001 x CBT-125 Centrifugal1 x TTT/4-800/L N 2,2KW (230/400V50HZ)EXEIIT3 VE Atex Unit1 x FU 15 40 Frequency Inverter1 x Flanged Spigot - 100mm1 x 125mm Wall Duct - 350mm1 x Wall Mounted Air Curtains - COR-N Series1 x Metal Inline Fan - VENT-315NK1 x FU 075 52 Frequency Inverter (IP20)1 x Female Ducting Connector - 500mm1 x Ducting 90 Degree Bend - 315mm1 x Singleflow SSDL150-1EC1 x Elta 3 Amp Electronic single phase speed controller.1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-HW1 x AEL - Outlet Flexible Connection for TLZ450 R1 x EBB-175 S DESIGN Centrifugal Extractor Fan1 x Synthetic Air Filter Media - 6mm x 2mtr x 10mtr Half Roll1 x Elta 10 Amp Electronic single phase speed controller.1 x EBB-250 M DESIGN Centrifugal Extractor Fan1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x Acoustic Box Fans (Inline) - CAB-1001 x COM-31 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Sentinel D-BOX 100S1 x Curved boot - 300mm1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Quietflow SQS150-1ECL - Centrifugal Box Fan1 x Spiral Duct Grille Termination - 315mm1 x Ducting T Piece Equal - 300mm1 x Elta SPA350/4-1AC - IP441 x Belt Drive Cased Axial Fan - 500mm - L version1 x Helios SB-250-C SilentBox Acoustic Inline Fan1 x Elta SPA500/4-3EC - IP541 x Soler & Palau - HCBT/6-355/H - IP651 x Soler & Palau HXM-350mm1 x Elta Turboflow-TF - 500mm(B) - Three phase1 x 204x60mm to 220x90mm Rectangular Adapter1 x Euro Series - Plate Axial - ESP500141 x Elta SLC500-1EC -IE5 Motor- IP551 x Centrif Duo Plus - Timer1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x Ducting T Piece Equal - 315mm1 x Pressed Ducting Saddle - 500mm1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x Ducting 15 Degree Bend - 315mm1 x Acopel F400-450/160
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...