• UPC/EAN:8413893602077
  • Model:CAB-125

Acoustic Box Fans (Inline) - CAB-125

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 223.2 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113210800

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-125 Data Sheet


CAB Series Data Sheet

1 x Spigot plate - 125mm1 x FSAF630B2DA Silencer1 x TD160 Mixvent - 100mm - TD160-N Standard1 x Metal Inline Fan - VENT-125NK1 x CPTA-E Flush mounted PIR sensor with timer1 x Female Ducting Connector - 710mm1 x Gripple HVAC Hanger Range - Loop Fast - LF2 - 3mtr1 x Metal Inline Fan - VENT-200NK1 x Prio 500 3 Phase - 230V or 400V - 50Hz1 x Flanged Spigot - 300mm1 x Ducting T Piece Equal - 300mm1 x Soler & Palau HXM-250mm1 x Duct Mounted Filter Box - G4 Grade Panel - 250mm1 x Ducting 90 Degree Bend - 300mm1 x Female Ducting Connector - 250mm1 x Speed Controller - REB31 x RUCK MTP 30, Stepped Speed control1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x RTRD - Three Phase Speed Controller - 2 Amp1 x Spiral Ducting 3 Meters - 1000mm1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x Spiral Ducting 1 meter - 315mm1 x Spiral Ducting 3 Meters - 315mm1 x Curved boot - 300mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Flanged Spigot - 250mm1 x Male Ducting Connector - 1000mm1 x Ducting 90 Degree Bend - 315mm1 x Ducting Reducers Long - 300mm-250mm1 x Female Ducting Connector - 1000mm1 x Duct Suspension Rings - 300mm1 x Spiral end cap - 250mm1 x Dektite Combo Pipe Flashing - DC210REC1 x Female Ducting Connector - 150mm1 x Spiral Duct Grille Termination - 150mm1 x Electronic extractor fan speed controller - FSC 1.51 x Ancillary Sealing Band - 150mm1 x Ducting 30 Degree Bend - 150mm1 x Soler & Palau TCBB/2-250/H - IP541 x Duct Termination with Mesh - 150mm1 x Raptor SDA250/4-1AC1 x Flanged Spigot - 150mm1 x Elta Wall Cowl SWC25/311 x Duct Quick Suspension Rings with Clasp - 150mm1 x Curved boot - 150mm1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x Duct Suspension Rings - 150mm1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Spiral Ducting 1 meter - 150mm1 x EBM Papst - W3G910-GU27-031 x Ducting 90 Degree Bend - 150mm1 x JETLINE-315 - In Line Centrifugal Duct Fan
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...