• UPC/EAN:8413893602077
  • Model:CAB-125

Acoustic Box Fans (Inline) - CAB-125

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 223.2 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113210800

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-125 Data Sheet


CAB Series Data Sheet

1 x Elta Quietflow Twin SQT150-1ECL1 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC35/401 x Elta SCP630/4-1AC - IP551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Spiral Ducting 1 meter - 250mm1 x Spiral end cap - 250mm1 x Elta ACO Panel 149-ACO14E1 x Etaline Max-Fan - 315mm - E2 011 x External weather louvre 500w x 500h - WL501 x Multiflow SMB500/4-1AC1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Vent Axia W300310 Controller Electronic 1.5A1 x RUCK MTP 20, 10K, Speed control1 x Transformer 5 Speed Controller - ATC1-4TK1 x 125mm Insulated 45 Degree Bend1 x PVO 200 (2-POLE) Plate Axial fan1 x Elta EC Electronic Controller1 x Transformer Speed Control - RTRE- 3.0Amp1 x Transformer 5 Speed Controller - ATC1-8TK1 x 220x90mm Insulated Rectangular T-Piece1 x 204x60mm to 125mm Insulated Straight Adapter1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Transformer Speed Control - RTRE- 7.0Amp1 x 2mtr Insulated Round Ducting - 125mm1 x 220x90mm Elbow Plenum with 160mm Spigot1 x Raptor SDA350/4-1EC1 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer 5 Speed Controller - ATC1-12TK1 x Elta SCP450/4-1AC - IP551 x Transformer speed controller - ATC1 - 10.0 Amps1 x RUCK MTP 30, Stepped Speed control1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 125mm Insulated 90 Degree Bend1 x Elta 6 Amp Electronic single phase speed controller.1 x Vent Axia 2.5Amp Industrial Electronic Speed Controller1 x Vent Axia T-Series Controller1 x Transformer (silent) speed controller - RE 5.0 Amp1 x 220x90mm x 2m Insulated Rectangular Duct1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x XPELAIR FR22/30 Controller,1 x 220x90mm to 160mm straight adapter1 x Transformer speed controller - ATC1 - 1.5 Amps1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x Trickle And Boost controller for use with the SLP EC Slimpak fans1 x Transformer Speed Control - RTRE- 5.0Amp1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/4-3 Three Phase1 x Spiral Ducting 3 Meters - 160mm1 x 220x90mm Equal T Piece1 x Systemair AR 200E2 Sileo - IP441 x 220x90mm to 204x60mm Rectangular Adapter1 x Anti Vibration Duct Suspension Rings - 125mm1 x Ducting 45 Degree Bend - 125mm1 x Ducting 45 Degree Bend - 160mm1 x Male Ducting Connector - 150mm1 x Spiral Ducting 1 meter - 80mm1 x Ducting 90 Degree Bend - 150mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...