• UPC/EAN:8413893602077
  • Model:CAB-125

Acoustic Box Fans (Inline) - CAB-125

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 223.2 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113210800

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-125 Data Sheet


CAB Series Data Sheet

1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Purlin Box 200/250 for RAW Cowls1 x K 315 L Sileo Metal Tube Fan1 x 220x90mm Equal T Piece1 x Male Ducting Connector - 300mm1 x Kitchen Grille with Grease Filter - 300x300 - NO GRILLE BOX1 x CC-800-5.5kw1 x DDMP12-12 1F 1800W M6A4 DA81 x Airvent Ceiling Sweep Fan - 36 inch - 4441221 x Elta Variable Speed Drive IP66 - 4.0KW1 x CBS-80 Outlet Flange for CBT-801 x 150mm - 200mm Round Reducer1 x Duct Fast Clamps - 200mm1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Elta Wall Cowl SWC45/501 x Casals Circular Outlet Connection Flange - 5102018032 x GRA-100 External Grill by S&P1 x Female Ducting Connector - 250mm1 x Spiral end cap - 250mm1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Ducting 45 Degree Bend - 100mm1 x Curved boot - 250mm1 x Ducting 45 Degree Bend - 250mm1 x Duct Fast Clamps - 250mm1 x Elta SLC355-1EC -IE5 Motor- IP551 x Heat Resistant In-line Axial Fan - VOK 135/120 H1 x Small Centrifugal Fan - CBM/4-180/184-150 W1 x DDMP 07-07 1F 1100W M6AO DA51 x Duct Quick Suspension Rings with Clasp - 250mm1 x External weather louvre 2728mmW x 1630mmH1 x CC-710-2.2kw1 x Soler & Palau - HCBT/4-400/H - IP651 x Cased Axial Fan Extension - 400mm dia1 x Spiral Ducting 3 Meters - 250mm1 x 204x60mm Rectangular to 100mm Round Adaptor1 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x AM pallet Delivery Surcharge1 x Airvent ceiling fan controller1 x Elta ACO Panel 149-ACO14E1 x DDMP 10-10 1F 1000W M6A2 DA51 x Systemair Save Connect 2.0 Internet Module1 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x Spiral Ducting 1 meter - 125mm1 x ACO8AC/EC AutoChangeover panel1 x Spiral Ducting 3 Meters - 355mm1 x CCZ-404-T (three Phase)1 x HV Wall Mounted Belt Drive Fan 1250mm 400V / 50Hz 1.1kW - Three Phase1 x Airvent Ceiling Sweep Fan - 56 inch - 4441241 x Elta Standard Ambient Flexible Connector - 710mm1 x 18M - 80mm PVC flexible ducting1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Nordik International Plus 90/36 - Ceiling Sweep Fan Range1 x Desk fan 9 inch - SFG91 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x Spiral Ducting 3 Meters - 160mm1 x Spiral end cap - 150mm1 x Pallet Delivery Surcharge1 x HCF - Ceiling Fan 1200mm (48 inch)1 x CONTROL ECOWATT - Basic1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x Elta Cased Axial Flange - 1000mm1 x Elta Wall Cowl SWC56/631 x Elta Cased Axial Flange - 630mm1 x Spiral Ducting 1 meter - 630mm1 x Direct Saturday Delivery Surcharge1 x Anti Vibration Duct Suspension Rings - 125mm1 x 150mm Wall Duct - 350mm
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...