• UPC/EAN:8413893602077
  • Model:CAB-125

Acoustic Box Fans (Inline) - CAB-125

£ 315.27 (excl. VAT)

£ 378.32 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 223.2 m3/h
Max Power: 50 Watts
Max Current: 0,20 Amps
Sound pressure Level (dB(A))@3m: 23db - Radiated
Temperature Range: -20/+40*C
Weight: 16 Kgs
Part Num: 5113210800

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-125 Data Sheet


CAB Series Data Sheet

1 x Raptor SDA450/6-1AC1 x Spigot plate - 300mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX450/4-3B Three Phase1 x HCF - Ceiling Fan 1200mm (48 inch)1 x AL 1000 D4 02 - High Performance Long Cased Axial Fan1 x Elta Wall Cowl SWC35/401 x Dektite Combo Pipe Flashing - DC210REC1 x Helios DDF-200 Roof Cowl1 x Elta SLC450/2-1AC - IP551 x Roof Axial Cowl - RAW10001 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x Helios DDF-315 Roof Cowl1 x Helios VARW 450/4 - TK1 x Flat Roof Terminal -OFT 5 - Asphalt1 x Elta Turboflow-TF - 450mm - Single phase1 x Elta SLC450-1EC -IE5 Motor- IP551 x Elta - HTS450/4-1 - Case Mounted Circulating Axial Fan1 x Elta Turboflow-TF - 500mm(A) - Three phase1 x EC-Vent Room Unit1 x CONTROL ECOWATT - Basic1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Systemair Save Connect 2.0 Internet Module1 x ACO-TK-ADS Auto Changeover Panel - Single Phase1 x Soler & Palau TCBB/4-400/H - IP441 x Nordik International Plus 90/36 - Ceiling Sweep Fan Range1 x Soler & Palau - HCBT/6-1000/H - IP551 x EBB-250 HM DESIGN Centrifugal Extractor Fan1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -4pole1 x Jetflow-HIT Metal inline - 250mm1 x Duct Termination with Mesh - 560mm1 x HCF - Ceiling Fan 1400mm (56 inch)1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX560/4-3 Three Phase1 x Spigot plate - 315mm1 x Rosenberg DQ 1000-8 plate axial fan1 x EBB-250 S DESIGN Centrifugal Extractor Fan1 x Decor 300-CRZ Bathroom Fan1 x BEAS-control module1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Access Door for Circular Duct - 400 x 300 - SIZE 501 x CC-314 M Cased Axial Fan (Single Phase)1 x Egg Crate Grille with Dust panel filter 1 inch- 300x300
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...