• UPC/EAN:8413893602077
  • Model:CAB-150

Acoustic Box Fans (Inline) - CAB-150

£ 342.97 (excl. VAT)

£ 411.56 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113862400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-150 Data Sheet


CAB Series Data Sheet

1 x SAVE VSR 300 heat recovery unit1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x SWF-100X Sidewall Mounted Extractor Fan1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x KVK SLIM 500 EC - Centrifugal Circular Duct Fan1 x Commercial Activated Carbon Filters - Panel Type - 24" x 24" x 1" - ACP1 x Elta Quietflow Twin SQT500-1ECL1 x KV DUO 315 EC1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP500141 x Vent Axia KAF Kitchen Extract Fan - 450mm - 2 Pole - Single Phase1 x DV-ROF-V-315 Roof mounted unit1 x Ducting 90 Degree Bend - 180mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Jet Fan IV 100-4 IE3 Induction Fan1 x DV-ROF-V-225 Roof mounted unit1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Jetflow-HIT Metal inline - 125mm1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Contactor Interface Station - CI91 x Spiral Ducting 1 meter - 180mm1 x 220x90mm to 160mm straight adapter1 x 220x90mm x 2m Insulated Rectangular Duct1 x GR40I-ZID.DC.CR (186640/A01) - 230v Single Phase1 x Ducting 45 Degree Bend - 180mm1 x Female Ducting Connector - 180mm1 x Ducting 15 Degree Bend - 180mm1 x "VX100" - Standard Bathroom Axial fan - 100mm1 x Air Quality Sensor - AQS1 x HD Series Control Damper - 2000mm X 1000mm1 x Flanged Spigot - 180mm1 x FAST-TRACK RANGE 90mm - Semi-Rigid Duct 50M1 x Male Ducting Connector - 180mm1 x Woods 31JMV14/2/6/33 - Long Cased Axial Fan 315mm1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x AF VVX-200 - Villavent Filter1 x Kitchen Grease Filter - Mesh Type Non standard : 381 x 355 x 47mm1 x Duct Split Rings (Pair) -710mm1 x 204x60mm 45 Degree Vertical Bend1 x Kitchen Grease Filter - Mesh Type NON standard 195H x 597W x 47mm Actual1 x 100mm Round Connector1 x Duct Mounted Filter Box - G4 Grade Panel - 200mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...