• UPC/EAN:8413893602077
  • Model:CAB-150

Acoustic Box Fans (Inline) - CAB-150

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113862400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-150 Data Sheet


CAB Series Data Sheet

1 x D2E-146-AP47-751 x Small Centrifugal Fans CBM/2-133/190 185w1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x KBA- Inlet Mounting 1801 x Small Centrifugal Fan - CBM/4-160/150-125 W1 x Duct Termination with Mesh - 200mm1 x EBM-Papst D3G133-BF05-14 Double inlet1 x Vent Axia ACM 150 inline mixed flow duct fan1 x RTRD - Three Phase Speed Controller - 2 Amp1 x RTRD - Three Phase Speed Controller - 4 Amp1 x Electronic extractor fan speed controller - FSC 1.51 x EFSC-3N- Single Phase Speed Control1 x Speed Controller - REB1-N1 x REB-CVF 0-10v Controller1 x Speed Controller - REB11 x Ancillary Pack for SLC-800 for 4 Pole and SLC-800/6B-3AC1 x CFI In-line 425 - Carbon Filter1 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Duct Termination with Mesh - 100mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Electrostatic Precipitator - 1H x 3W1 x CBB-60N Centrifugal1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x Duct Termination with Mesh - 315mm1 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x Elta SCP315/4-1AC - IP551 x Elta Standard Ambient Flexible Connector - 800mm1 x Elta Turboflow-TF - 630mm - Three phase1 x DDMP 07-07 1F 1100W M6AO DA51 x Impeller Side Guard - 800mm1 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Remote controller FLEX - for VEKO INT1 x Helios TSW 7.5 Amp Transformer speed controller1 x RDS 11 Helios Transformer Controller With Motor Protection1 x DEF-140T Inlet Guard for the CBT-100N1 x Speed Controller - REB161 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CO2 Room Sensor - CO2-R1 x ACO8AC/EC AutoChangeover panel1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x CBA-100 Inlet Flange for CBT-1001 x VEKA INT 2000/15.0-L1 EKO1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x 100mm Round Connector with Damper1 x Flat Roof Terminal -OFT 5 - Asphalt1 x KBA- Inlet Mounting 2251 x CBS-100 Outlet Flange for CBT-1001 x DDMP 10-10 1F 1000W M6A2 DA51 x CBT-80N Centrifugal1 x Potentiometer EGH 01 - for DDMP Fans1 x DPD 12PM Delivery Surcharge1 x Run On Timer - 5s - 4hrs - RT5A1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x SDD-U Anti Vibration Pads1 x HXP450/6-1 - 6 Pole - Single Phase1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x GRA-100 External Grill by S&P1 x Chaysol DA 9/9 3 speed1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x MEV Spider Additional Spigots1 x RDH Flange - 03151 x Nicotra RDH G2E7-04501 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase1 x Elta Skyflow SSRL710-1EC1 x Purlin Box 630/710 for RAW Cowls1 x CBS-160 Outlet Flange for CBT-1601 x Transformer 5 Speed Controller - ATC1-4TK1 x Helios TSW 1.5 Amp Transformer speed controller1 x Transformer speed controller - ATC1 - 1.5 Amps1 x 7 Day Programmable TIMECLOCK1 x TEM 035 - 5 Speed Transformer Speed Control1 x EBM-Papst D2E097-BK76-98 Double inlet1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB31 x DDMP 09/09 Mounting Flange1 x DEF-CBM-RE-7 - Protection Guard1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x CBM 7/7 147w 4P RE-VR1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x ADH E0-250 Flange - 0250 ADHE/RDHE1 x DDMP 10-08 FLANGE1 x CBM 9/7 4p 420W RE-VR1 x DDMP 09/07 Mounting Flange
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...