• UPC/EAN:8413893602077
  • Model:CAB-150

Acoustic Box Fans (Inline) - CAB-150

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113862400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-150 Data Sheet


CAB Series Data Sheet

2 x 204x60mm Insulated Rectangular Vertical 90° Bend2 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase3 x Elta SCP400/4-1AC - IP551 x CBA-100 Inlet Flange for CBT-1004 x SPI-100 C Iris damper2 x ACOAS/ AC/EC Auto Changeover 8Amp4 x KBA- Inlet Mounting 2251 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)4 x KAD-225-F400 Rectangle Flexible Connector1 x CFI In-line 150 - Carbon Filter4 x Duct Termination with Mesh - 150mm1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x RD35S-4DW.6W.3L - 122297 (Three Phase)3 x KBA- Inlet Mounting 3155 x Helios ESA-1 Surface mounted Speed Control 1amp3 x KBA- Inlet Mounting 1803 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x SD-MUB Vibration pad set2 x VTR 500 STD Filter Kit1 x Lo-Carbon Silhouette 100T (Timer)3 x Duct Termination with Mesh - 100mm3 x CBT-130N Centrifugal2 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR1 x Twinflow STDL315-1EC1 x Comefri - TLZ 450 R - High Performance Scroll Fan3 x Helios PA10 Speed Potentiometer1 x Potentiometer EGH 01 - for DDMP Fans1 x CCpro 40 (1CC9402) Long Casing Extension2 x Run On Timer - 5s - 4hrs - RT5A1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR3 x DDMP 07/07 Mounting Flange4 x 100mm Round Connector with Damper2 x Helios HQW-355/4 - IP551 x Duct Termination with Mesh - 400mm3 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm5 x CBM 7/7 147w 4P RE-VR1 x CMT/4-250-100 1.1KW - Single inlet centrifugal fan direct driven ( LG-90)4 x CBS-100 Outlet Flange for CBT-1002 x ACO3TO-ADS-VFC-7.1A1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3002 x Silentub - STUB 2002 x Duct Termination with Mesh - 450mm1 x TUNE-R-200-3-M3 - Control Damper2 x WSD 100 (1060x1060x70)1 x CBA-160 Inlet Flange for CBT-1603 x HIMF - Mixed Flow Fan 125mm Inline Fan4 x 125mm Round Connector with Damper4 x ELTA - Three Phase Transformer 3amps5 x DDMP 10-10 1F 1000W M6A2 DA54 x Flat Roof Terminal -OFT 5 - Asphalt2 x VA 9/2 T - High Temp Axial Fan,1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR2 x DDMP 10-08 FLANGE1 x Quietflow Twin SQTDCV250-1ECL2 x ELTA - Single Phase Transformer 2amps2 x SDD-U Anti Vibration Pads1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase3 x CBB-60N Centrifugal1 x Helios ZNE Electronic Fan Overrun Timer1 x Round ceiling diffuser 300mm2 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x Quietflow SQS250-1ECL - Centrifugal Box Fan1 x Backdraught Shutters 039-SFSV-63/711 x Economy Airvent 150mm Fan With Pullcord & Shutters2 x RUCK MTP 20, 10K, Speed control4 x DPD 12PM Delivery Surcharge2 x Biflow SB315-CON4-3 - High Temperature Bifurcated Fan1 x Economy Airvent 100mm Fan with Timer1 x MTP 10, 10K, Speed control3 x Control switch - CR1501 x Silentub - STUB 1001 x Duct Termination with Mesh - 355mm1 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x ADH E0-450 Flange - 0450 ADHE/RDHE1 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x 220x90mm Insulated Rectangular Horizontal 90° Bend2 x MWS 5 – Transformer Controller With Motor Protection Unit1 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x Comefri - TLZ 225 R - High Performance Scroll Fan1 x Binks Bullows - Spray Booth Filter1 x Multiflow SMB550/4-1AC2 x DDMP 12-12 3F 5700W M6M0 DG73 x CBB-80N Centrifugal2 x Transformer speed controller - ATC1 - 1.5 Amps1 x MWS-75 Transformer controller with TK -7.5A1 x EFSC-3N- Single Phase Speed Control1 x Elta Quietflow Twin SQT150-1ECL1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Vent Axia T-Series Wall Model TX6WL2 x Vent Axia T-Series Wall Model TX9WL2 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x TDP-D Pressure Sensor with Display1 x Speed Controller - REB61 x Speed Controller - REB161 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Duct Termination with Mesh - 560mm1 x Dektite Combo Pipe Flashing - DC210REC1 x Universal Pipe Fixing Clip1 x MEV Spider Additional Spigots1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x DDMP 09/07 Mounting Flange1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Helios TSW 1.5 Amp Transformer speed controller1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x Elta SCP315/4-3AC - IP551 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x EBM-Papst D2E097-BK76-98 Double inlet1 x Rectangular Airbrick Adaptor1 x FRQ5-4A V2 Inverter Speed Controller1 x ACQ-20012D Acoustic Inline Box Fan1 x HXP450/6-1 - 6 Pole - Single Phase
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...