• UPC/EAN:8413893602077
  • Model:CAB-150

Acoustic Box Fans (Inline) - CAB-150

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113862400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-150 Data Sheet


CAB Series Data Sheet

1 x Vent Axia Silent 100T (TIMER)1 x DDMP 09/09 Mounting Flange1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Electrostatic Precipitator - 1H x 3W1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x SD-MUB Vibration pad set1 x Duct Termination with Mesh - 450mm1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Duct Termination with Mesh - 150mm1 x CBA-100 Inlet Flange for CBT-1002 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x DDMP 12-12 3F 5700W M6M0 DG71 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit1 x DDMP 10-10 1F 1000W M6A2 DA51 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Remote Timer Control - 13511 x Multiflow SMB550/4-1AC1 x Speed Controller - REB101 x REE-2 Electronic Speed Controller1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x DDMP 09-09 3F 2130W M6A4 DG01 x Transformer Speed Control - RTRE- 7.0Amp1 x Speed Controller - REB81 x DDMP 12-12 3F 1810W M6A4 DG01 x Mini Diffuser - 100mm1 x Elta Variable Speed Drive IP66 - 1.5KW1 x AIRVENT speed control - AIR4019611 x ENV 100 12v transformer SELV1 x SAVE VSR 300 heat recovery unit1 x DDMP 07/07 Mounting Flange1 x RUCK MTP 20, 10K, Speed control1 x KBA- Inlet Mounting 1801 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Duct Termination with Mesh - 250mm1 x SG-400 Fan Guard for flange connection1 x DDMP 12-09 1F 1800W M6A4 DA81 x CBS-100 Outlet Flange for CBT-1001 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x FU 22 25 Frequency Inverter1 x ELTA - Three Phase Transformer 3amps1 x Universal Pipe Fixing Clip1 x Duct Termination with Mesh - 315mm1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR4 x 220x90mm x 1m Insulated Rectangular Duct1 x VA 9/2 T - High Temp Axial Fan,2 x DDMP 10-08 1F 1000W M6A2 DA51 x Silentub - STUB 2001 x CBP-7/7-RC1 x HXP450/6-1 - 6 Pole - Single Phase1 x DDMP 12-12 1F 1800W M6A4 DA81 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF315/4-1AC - Single Phase2 x Duct Termination with Mesh - 200mm3 x 125mm Round Connector with Damper1 x DDMP 10-08 FLANGE2 x CBM 9/7 4p 420W RE-VR1 x ELTA - Single Phase Transformer 2amps1 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x GRA-100 External Grill by S&P1 x Potentiometer EGH 01 - for DDMP Fans1 x 204x60mm x 1m Insulated Rectangular Duct1 x DDMP 09/07 Mounting Flange1 x RF-100 M5 Grade Filter for S&P MVHR units1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-1AC - Single Phase1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Direct Delivery Surcharge1 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit1 x Chaysol DA 9/9 3 speed1 x CBS-130 Outlet Flange for CBT-1301 x CBM 7/9 6p 72W RE-VR1 x DDMP 12-09 FLANGE1 x Kitchen Extract Kit with Grease Filter and External Wall Fan - Standard - CEF-450
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...