• UPC/EAN:8413893602077
  • Model:CAB-160

Acoustic Box Fans (Inline) - CAB-160

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113811600

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-160 Data Sheet


CAB Series Data Sheet

1 x Transformer (silent) speed controller - RE 3.0 Amp1 x Multiflow SMB550/4-1AC1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Vent Axia ACM 125 inline mixed flow duct fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x QPTW 250C Acoustic Twin Fan with Controller2 x Speed Controller - REB161 x Elta Variable Speed Drive IP66 - 5.5KW1 x VTR 300 STD Filter Kit5 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR4 x ACO8AC/EC AutoChangeover panel3 x Helios RR-250-C Centrifugal inline fan1 x LFBR 315 G4 - Helios Inline Filter Box - 315mm4 x CBA-100 Inlet Flange for CBT-1001 x Singleflow SSDL315-1EC2 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x Silentub - STUB 1002 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x TUNE-R-200-3-M2 - Control Damper2 x HIMF - Mixed Flow Fan 100mm Inline Fan3 x CBM 12-12 1100w 6P Three Phase2 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x Single Deflection Grille 400mm with OBD damper1 x Speed Controller - REB2.5-N1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x TUNE-R-200-3-M4 - Control Damper2 x Duct Termination with Mesh - 355mm3 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x SAVE VSR 300 heat recovery unit2 x CO2 Room Sensor - CO2-R2 x Round ceiling diffuser 200mm1 x EBM-Papst D3G133-BF05-14 Double inlet2 x VEKA INT 2000/15.0-L1 EKO2 x Electrostatic Precipitator - 1H x 3W2 x CSB-60 Centrifugal fan2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x CBT-100N Centrifugal2 x DDMP 10-08 3F 2210W M6A4 DG01 x DA9/9-NT1 x TD160-NT Mixvent - 100mm - TD160 Timer2 x Potentiometer EGH 01 - for DDMP Fans1 x IR24-P - Presence detector1 x VTR 500 STD Filter Kit1 x AIRVENT speed control - AIR4019611 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Round ceiling diffuser 250mm2 x SPI-100 C Iris damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Helios ZNE Electronic Fan Overrun Timer1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Duct Termination with Mesh - 100mm1 x SD-MUB Vibration pad set2 x ACOAS/ AC/EC Auto Changeover 8Amp2 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x CFI In-line 150 - Carbon Filter1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x CCpro 40 (1CC9402) Long Casing Extension1 x WSD 100 (1060x1060x70)1 x Mini Diffuser - 100mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...