• UPC/EAN:8413893602077
  • Model:CAB-160

Acoustic Box Fans (Inline) - CAB-160

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113811600

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-160 Data Sheet


CAB Series Data Sheet

1 x ELM 18 EX Flexible Cuff for ERM 182 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x VTR 300 STD Filter Kit2 x CSB-60 Centrifugal fan3 x Helios ESA-1 Surface mounted Speed Control 1amp2 x CBT-100N Centrifugal2 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x Singleflow SSDL315-1EC1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR4 x CBA-100 Inlet Flange for CBT-1002 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Single Deflection Grille 400mm with OBD damper1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x CBM 12-12 1100w 6P Three Phase1 x SD-MUB Vibration pad set1 x WSD 100 (1060x1060x70)1 x Silentub - STUB 1002 x SPI-100 C Iris damper1 x SAVE VSR 300 heat recovery unit2 x CCpro 40 (1CC9402) Long Casing Extension3 x Helios RR-250-C Centrifugal inline fan1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x ACO8AC/EC AutoChangeover panel1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C3 x DDMP 12-12 3F 5700W M6M0 DG71 x Helios HQW-355/4 - IP551 x VTR 500 STD Filter Kit1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Duct Termination with Mesh - 355mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Duct Termination with Mesh - 100mm1 x IR24-P - Presence detector1 x DEF-CBM-RE-7 - Protection Guard1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x KAD-225-F400 Rectangle Flexible Connector2 x 100mm Round Connector with Damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x DDMP 10-10 1F 1000W M6A2 DA51 x CBT-80N Centrifugal2 x CBB-60N Centrifugal1 x Quietflow Twin SQTDCV250-1ECL1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x Flakt Woods ME 1.3 speed controller 3amp - EA9011581 x CFI In-line 150 - Carbon Filter1 x TD160-NT Mixvent - 100mm - TD160 Timer2 x Duct Termination with Mesh - 450mm1 x KBA- Inlet Mounting 2251 x Duct Termination with Mesh - 150mm3 x DDMP 07/07 Mounting Flange2 x Flat Roof Terminal -OFT 5 - Asphalt1 x Potentiometer EGH 01 - for DDMP Fans1 x LFBR 160 G4 - Helios Inline Filter Box - 160mm3 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)2 x Mini Diffuser - 100mm1 x ACO3TO-ADS-VFC-7.1A1 x DA9/9-NT1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x DDMP 12-09 1F 1800W M6A4 DA81 x CBS-100 Outlet Flange for CBT-1001 x Helios ZNE Electronic Fan Overrun Timer1 x VEKA INT 2000/15.0-L1 EKO1 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x FU 15 16 Frequency Inverter1 x DDMP 09-07 1F 1000W M6A0 DA51 x Remote Timer Control - 13511 x Speed Controller - REB2.5-N1 x ELTA - Three Phase Transformer 3amps1 x CBB-80N Centrifugal1 x CAD-COMPACT 900 ADVANCED N8 - MVHR unit
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...