• UPC/EAN:8413893602077
  • Model:CAB-160

Acoustic Box Fans (Inline) - CAB-160

£ 360.12 (excl. VAT)

£ 432.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 363.6 m3/h
Max Power: 100 Watts
Max Current: 0,40 Amps
Sound pressure Level (dB(A))@3m: 29db - Radiated
Temperature Range: -20/+40*C
Weight: 18 Kgs
Part Num: 5113811600

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-160 Data Sheet


CAB Series Data Sheet

2 x Elta 6 Amp Electronic single phase speed controller.3 x VTR 300 STD Filter Kit2 x Compact SCD450/4-1AC1 x CFI In-line 150 - Carbon Filter1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x DDMP 10-08 3F 2210W M6A4 DG01 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x TUNE-R-200-3-M4 - Control Damper1 x 100mm Round Connector with Damper2 x DS-2 2-Speed Switch (3 Phase)2 x AIRVENT speed control - AIR4019611 x Speed Controller - REB2.5-N1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Quietflow Twin SQTDCV250-1ECL2 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Elta SCP400/4-1AC - IP551 x SAVE VSR 300 heat recovery unit1 x DA9/9-NT1 x Duct Termination with Mesh - 450mm1 x CO2 Room Sensor - CO2-R1 x IR24-P - Presence detector1 x ACO3TO-ADS-VFC-7.1A3 x SPI-100 C Iris damper1 x Duct Termination with Mesh - 100mm3 x Helios RR-250-C Centrifugal inline fan1 x Flakt Woods ME 1.3 speed controller 3amp - EA9011582 x Duct Termination with Mesh - 150mm3 x CBT-100N Centrifugal1 x Duct Termination with Mesh - 355mm2 x HIMF - Mixed Flow Fan 125mm Inline Fan2 x ACO8AC/EC AutoChangeover panel1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x DDMP 07/07 Mounting Flange1 x ADH E0-450 Flange - 0450 ADHE/RDHE2 x CSB-60 Centrifugal fan1 x CCpro 40 (1CC9402) Long Casing Extension1 x MTP 10, 10K, Speed control2 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Vent Axia Trickle & Boost Switch1 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Duct Termination with Mesh - 250mm1 x KAD-225-F400 Rectangle Flexible Connector1 x RDS 1 Helios Transformer Controller With Motor Protection1 x Duct Termination with Mesh - 400mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CPTA-E Flush mounted PIR sensor with timer1 x REU 3amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Elta Variable Speed Drive IP66 - 5.5KW1 x Electrostatic Precipitator - 1H x 3W1 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x Chaysol Da 12/12 CMAL - 1100W 6 Pole - Closed Motor - Three Phase1 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer (silent) speed controller - RE 1.5 Amp1 x KBA- inlet mounting flange for CRMT 2501 x Speed Controller - REB11 x Lo-Carbon Silhouette 100T (Timer)1 x RDH Flange - 03151 x Chaysol Da 15/11 CMAL - 2200W 6 Pole - Closed Motor - Three Phase1 x RDH Flange - 02501 x Mini Diffuser - 100mm1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x Elta SLC560/4C-3AC - IP551 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x ELTA - Three Phase Transformer 3amps1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 131.69

I've had 2 of these fans for 4 years now, and they are great...