• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 398.37 (excl. VAT)

£ 478.04 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x ERR 12/1 Centrifugal inline fan1 x *VORT HRW 40 MONO Evo HCS WIFI - Single Room Heat Recovery Unit,1 x SAVE VTC 200 R High efficiency Heat Recovery Unit1 x Topvex SF12 HWL. Supply AHU1 x Villiavent VSR 300 Spare Motor1 x JETLINE-125 - In Line Centrifugal Duct Fan1 x Metal Inline Fan - VENT-125NK1 x SAVE VTC 700 L Heat Recovery Unit1 x Vent Axia INTEGRA PLUS EC1 x CADB/T-HE 54 ECOWATT Series1 x GEO Ground Source Heat Exchanger1 x GENIOX 11 Internal Mounted Unit1 x Transformer (silent) speed controller - RE 7.0 Amp1 x Round ceiling diffuser 300mm1 x GENIOX 11 Roof Mounted External Unit1 x M5/G4 filter complete filter kit for IDEO HR.1 x ORKA HR D150 R8 MVHR unit1 x Villiavent VTC 700 Spare Filter Set - F7/M5 Grade1 x SAVE VTC 200 L High efficiency Heat Recovery Unit1 x filter pack (set of 2) pt no. 4438891 x Ducting 90 Degree Bend - 200mm1 x Genius Whole house unit -1 x Soler & Palau TCBB/4-450/H - IP651 x Spiral Ducting 1 meter - 355mm1 x Etaline 355mm - E2-011 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x Male Ducting Connector - 800mm1 x Ducting 90 Degree Bend - 800mm1 x Female Ducting Connector - 800mm1 x Duct Termination with Mesh - 800mm1 x Ducting T Piece Equal - 355mm2 x Spigot plate - 800mm1 x Ducting 90 Degree Bend - 355mm1 x Spiral Ducting 3 Meters - 800mm1 x VKS 355-500 Automatic shutter1 x Curved boot - 150mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x HV-RC 230mm (With Wall Kit)1 x Acoustic MiniBox Fan - MINI-BOX 2001 x Soler & Palau TCBT/4-800/G - IP651 x Ducting 15 Degree Bend - 150mm1 x Spiral Ducting 1 meter - 150mm1 x Ducting Y Piece - 150mm1 x 220x90mm x 1m Insulated Rectangular Duct1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Classic SAX30/12A Window/Wall Mounted1 x Time Delay Unit - DT20B1 x Ancillary Pack for SLC-5001 x Ancillary Pack for SLC-900 for SLC900/4B-3AC1 x Ancillary Pack for SDA350/4-1EC1 x Helios ZNE Electronic Fan Overrun Timer1 x Gorilla HVLSX501 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Ancillary Pack for SLC-5601 x Classic SAX30/12ARB Wall Mounted1 x MUB 016 200EC - Acoustic EC Box Fan1 x Male Ducting Connector - 160mm1 x Spiral Ducting 1 meter - 160mm1 x Female Ducting Connector - 160mm1 x KVK Slim 200 - Low profile Semi Acoustic Box Fan
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...