• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 418.29 (excl. VAT)

£ 501.95 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x FU 15 40 Frequency Inverter1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Elta Variable Speed Drive IP66 - 7.5KW2 x Elta Variable Speed Drive IP66 - 2.2KW1 x FRQ5-10A Inverter Speed controller1 x FU 15 16 Frequency Inverter2 x Elta Variable Speed Drive IP66 - 1.5KW1 x Frequency converter RUCK - FU 075 201 x Frequency converter FU 075 14 - IP661 x Elta Variable Speed Drive IP66 - 0.75KW1 x FU 22 25 Frequency Inverter1 x FU 075 52 Frequency Inverter (IP20)1 x FRQ5-4A V2 Inverter Speed Controller1 x FRQ-10A V2 Inverter Speed controller1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x FU 075 04 Frequency Inverter (IP20)1 x Frequency converter RUCK - FU 075 211 x FU 22 04 Frequency Inverter1 x ELTA - Three Phase Transformer 3amps1 x Elta 10 Amp Electronic single phase speed controller.1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x ELTA - Single Phase Transformer 2amps1 x Circular Ceiling Diffuser - TST 1251 x NKS-D swirl diffuser v-300 x 300mm1 x Circular Ceiling Diffuser - TST 2002 x Electronic extractor fan speed controller - FSC 1.51 x Circular Ceiling Diffuser - TST 1001 x Balance S Diffuser - NO RING - 125mm1 x PCA Diffuser - PCA-3151 x Circular Ceiling Diffuser - TST 1601 x JSR 200 Painted RAL50181 x EC6H - Reversible Group Fan Electronic Controller1 x Round ceiling diffuser 400mm1 x Curved Blade Grille 600x600 (2way blow)1 x Elta 3 Amp Electronic single phase speed controller.1 x Airvent ceiling fan controller1 x ELTA - Single Phase Transformer 8amps1 x Balance S Diffuser - NO RING - 100mm1 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x EFSC-3N- Single Phase Speed Control2 x Elta 3 Amp Electronic single phase speed controller with TK1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Elta 2 Amp Electronic single phase speed controller.1 x COM-31 x ELTA - Single Phase Transformer 4amps2 x AIRVENT speed control - AIR4019611 x ELTA - Single Phase Transformer 12amps1 x Round ceiling diffuser 200mm1 x PCA Diffuser - PCA-2501 x Elta 6 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 350mm1 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 250mm1 x ELTA - Single Phase Transformer 10amps2 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A1 x Push Timer Switch - ZA41 x Helios ZNE Electronic Fan Overrun Timer1 x Time Delay Unit - DT20B1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x ACOAS/ AC/EC Auto Changeover 8Amp2 x ACO8AC/EC AutoChangeover panel1 x EC-Vent control board1 x Elta ACO Panel 149-ACO14E1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent Room Unit1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Elta ACO Panel 149-ACO18B1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Systemair Save Connect 2.0 Internet Module1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC35/401 x GRA-100 External Grill by S&P1 x Elta Wall Cowl SWC45/501 x Elta Wall Cowl SWC25/311 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x RTRD - Three Phase Speed Controller - 2 Amp2 x Contactor Interface Station - CI91 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3002 x CO2 Room Sensor - CO2-R1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-12TK1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x TG-K Duct temperature sensor1 x BEAS-control module1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Vent Axia T-Series Controller1 x Transformer (silent) speed controller - RE 3.0 Amp1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Speed Controller - REB51 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x ACO 149-ACO1/EDV1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Transformer (silent) speed controller - RE 5.0 Amp1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Multiflow SMB550/4-1AC1 x REB-CVF 0-10v Controller1 x PIR Sensor - PIR21 x Transformer Speed Control - RTRE- 1.5Amp1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Silent 100 Window Kit - windowS1 x Speed Controller - REB11 x PIR Sensor - PIR41 x QPTW 250C Acoustic Twin Fan with Controller1 x VTR 300 STD Filter Kit1 x Speed Controller - REB2.5-N1 x Elta - Room Sensor - Temp/Humid/C021 x SAVE VSR 300 heat recovery unit1 x VEKA INT 2000/15.0-L1 EKO1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...