• UPC/EAN:8413893602077
  • Model:CAB-200

Acoustic Box Fans (Inline) - CAB-200

£ 398.37 (excl. VAT)

£ 478.04 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 921.6 m3/h
Max Power: 205 Watts
Max Current: 0,70 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 22 Kgs
Part Num: 5113812400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB-200 Data Sheet


CAB Series Data Sheet

1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 - 4 pole1 x Spiral Duct Grille Termination - 560mm1 x Systemair AW Sileo 710-DS1 x Curved boot - 560mm1 x HQD 710/4/4 Plate Axial Fan (2.2kw)1 x Etaline 250mm - D2 01 3 Phase1 x HCFT/6-1000-HX plastic impeller plate fan1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x Soler & Palau - HCBT/6-710/H - IP651 x EKHR 280-2SW BCMI1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)1 x HRST/4-710-20 BPN C Rotorex Sickle bladed fan1 x Duct Split Rings (Pair) -560mm1 x AW 355 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Etamaster EM 250 EC 01 inline mix-vent fan1 x FlameProof Plate Axial Fan - Single Phase - 12 inches - Eexd IIC T4 -4pole1 x Elta SCP710-1EC1 x FSAF315B2DX Silencer 355/81 x Soler & Palau - HXTR/6-710/H - IP54 - BFLOW1 x Elta Unpodded Silencer Melinex 2D-560mm1 x FSAF1250C1DA Silencer 1320/201 x Etaline 250mm1 x AW 420 D4-2-EX Explosion Proof Axial Fan - ATEX1 x Ducting Reducer Long - 1000mm to 630mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x Ducting 90 Degree Bend - 560mm1 x ZAP 710-63 Plate axial fan1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x Rotorex HXTR Sickle Bladed Plate Axial Fan - 6 Pole - Three Phase - 710mm1 x TD1000 Mixvent - 250mm1 x Ducting Reducer Long - 1000mm to 900mm1 x KV 250 L Sileo1 x FSAF355B2DX Silencer 395/81 x HRT/6-710/30-BQ E21 x Ducting 30 Degree Bend - 1000mm1 x Etaline 280mm1 x AW 650 D6-2-EX Explosion Proof Axial Fan - ATEX1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x JETLINE-250 - In Line Centrifugal Duct Fan1 x Spigot plate - 560mm1 x Helios GigaBox 250mm GBW 250/4 centrifugal1 x Duct Suspension Rings - 250mm1 x HRB/6-560-35-APN-C1 x Soler & Palau - HCBB/6-560/H - IP651 x EC-Basic-T temperature1 x Duct Termination with Mesh - 250mm1 x Hydor HPA560/6-1A1 x PRIO-160 EC 160mm Inline Mixvent Fan1 x DT-1 Duct Mounted Thermostat1 x EuroSeries (ESP) - Plate Mounted Axial Fans 560-34-B1 x ELTA - Single Phase Transformer 10amps1 x CO2 Room Sensor - CO2-R1 x 150mm Round 90 Degree Bend1 x Commercial Thermostat - TH161 x PCA Diffuser - PCA-3151 x Differential Pressure Switch - 20 - 300 Pa - IP651 x RS-160L1 x Elta SCP560/4-1AC - IP551 x Elta 2 Amp Electronic single phase speed controller.1 x AES-Fire control unit1 x Circular Ceiling Diffuser - TST 1251 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Etaline 150mm - EL 150L E2 011 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Soler & Palau - HCBT/4-1000/L - IP551 x Contactor Interface Station - CI91 x Elta 6 Amp Electronic single phase speed controller.1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta SCP560-1EC - IP551 x Elta 10 Amp Electronic single phase speed controller.1 x Soler & Palau - HCFT/4-1000/L-X - IP551 x Soler & Palau - HCBT/6-1000/H - IP551 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Soler & Palau - HXTR/4-560/H - IP541 x ELTA - Single Phase Transformer 8amps1 x Metal Inline Fan - VENT-160NK1 x Spiral end cap - 100mm1 x Flexible PVC Ducting - 220x901 x Gorilla HVLSX501 x HRT/4-355-BPN1 x HV-RC 230mm (With Wall Kit)1 x Classic SAX30/12AR Window/Wall Mounted1 x HQD 355/4 Plate Axial Fan (4-pole)1 x Venturia Whole House Ventilation1 x MUB 016 200EC - Acoustic EC Box Fan1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x Classic SAX30/12ARB Wall Mounted1 x Elta SCP350/4-3AC - IP551 x Helios SB-200-C SilentBox Acoustic Inline Fan1 x Elta HWFA-650 Oscillating Wall Fan1 x ES9G Window Fan Systemair1 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...