• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Ancillary Sealing Band - 200mm1 x HQD 630/4 EX - ATEX Rated Plate Axial Fan (4-pole)1 x Soler & Palau - HXTR/6-800/H - IP541 x DDMP 08-09T 1F 1100W M6A1 DA51 x 100mm Round 45 Degree Bend2 x CBMT/Q 150-27 1 HEATER KIT1 x Duct Termination with Mesh - 100mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm2 x CBMT/Q 200-30 1 HEATER KIT1 x Flanged Spigot - 100mm1 x DA 15/15 N2T1 x Spiral Ducting 3 Meters - 315mm1 x DDMP 12-12 3F 5700W M6M0 DG72 x Elta SLC315/4-3AC - IP551 x DDMP 09-09 3F 2130W M6A4 DG01 x DDMP 12/12 2kW 1Ph - M6A4 DA8+FL1 x DDMP 15-11 3F 5200W M6M1 DG71 x CBMT/Q 250-54 1 HEATER KIT1 x Duct Fast Clamps - 100mm1 x Male Ducting Connector - 315mm1 x DDMP 10-10 1F 1000W M6A2 DA51 x CBMT/Q 315-30 1 HEATER KIT1 x CBMT/Q 315-90 3 HEATER KIT1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x BDS 800 RA b/d shutter1 x DA 10/10 N2T1 x VBK 65 - Water heating battery1 x CBMT/Q 400-55 1 HEATER KIT1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x AirTrak Heater-315mm1 x DA 7-7 NT V608404 (With Feet)1 x DA 18 - 18 NT -with Feet (72600007)1 x Commercial Thermostat - TH161 x Raptor SDA315/4-1AC1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x Acoustic Box Fans (Inline) - CAB-315 RE1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x HRT/6-800/28-BZN-68C1 x 1mtr Round Ducting - 125mm2 x 100mm Round Condensation Trap1 x Chaysol DA 10/8 NT (V600006)1 x Small Centrifugal Fans CBM/2-133/190 185w1 x PRIO-160 160mm Inline Mixvent Fan1 x Etamaster EM 150 L EC 01 inline mix-vent fan1 x 100mm Round Connector1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x Nicotra AFK 315-40/4M-B1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x Small Centrifugal Fan - CBM/4-160/150-125 W1 x Spiral Ducting 1 meter - 355mm1 x Metal Inline Fan - VENT-100NK1 x Atex Inline Fan 180mm - ERM18EXE2 x Soler & Palau - HCBT/4-800/H - IP551 x HCFT/4-800mm plastic impeller plate fan1 x G2 duct Mounted Panel Filter - 435 x 435 x 47mm1 x CBP-7/7-RC1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Universal Pipe Fixing Clip1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm1 x TD500 Mixvent - 160mm - TD500(5211302400)1 x Soler & Palau TCBB/4-315/H - IP441 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Soler & Palau VFD-T inverter 17 amp IP541 x HV Wall Mounted Belt Drive Fan 1000mm 400V / 50Hz 0.75kW - Three Phase1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x G4 duct mounted panel filter 535 x 535 x 47mm1 x S&P RF4C-160/062 K040 SF-1744 (230V50Hz) VE1 x Elta SLC560/4C-3AC - IP551 x Transformer Speed Control - RTRE- 5.0Amp1 x Soler & Palau TCBT/4-315/H - IP441 x Female Ducting Connector - 315mm1 x Ducting Reducers Short - 315mm-250mm1 x 100mm Wall Duct - 350mm1 x 204x60mm Rectangular to 100mm Round Adaptor1 x FlameProof Plate Axial Fan - Single Phase - 9 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 7.5 inches - Eexd IIC T4 -2pole1 x Three Phase ATEX Compact axial fan - 355mm - compactA3ATE1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP315141 x DPD SAT Delivery Surcharge1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x Three Phase ATEX Compact axial fan - 630mm - compactATEX6
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...