• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Duct Quick Suspension Rings with Clasp - 150mm1 x 125mm Wall Duct - 350mm1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Etaline 355mm E4 011 x KVK SLIM 125 EC - Centrifugal Circular Duct Fan1 x Clearflow CF Roof Mounted Vertical Discharge Centrifugal Fan - CF350/4-3AC - Three Phase1 x 100mm Round Connector1 x BDRAX 250-E2 Cased Axial External Rotor Fan1 x Soler & palau TCBT/2-250/H - IP441 x 150mm Round Connector1 x Acopel F400-315/1601 x Elta Standard Ambient Flexible Connector - 1000mm1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Acopel F400-710/1801 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Acopel F400-630/1601 x AEL - Outlet Flexible Connection for TLZ450 R1 x Duct Suspension Rings - 150mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Anti Vibration Duct Suspension Rings - 150mm1 x Air Quality Sensor - AQS1 x 110 x 54mm Flat Channel Connector1 x Duct Termination with Mesh - 150mm1 x Heat Resistant In-line Axial Fan - VO-1201 x Elta Standard Ambient Flexible Connector - 315mm1 x Soler & Palau TCBB/4-250/H - IP541 x Acopel F400-120/1601 x SEL355/4-1AC1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x AMD 250/2 - Medium pressure axial fan 3-PH 400 V1 x Acopel F400-250/1601 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Ducting 30 Degree Bend - 150mm1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x SEL355/2-1AC1 x Acopel F400-225/1601 x Acopel F400-500/1601 x 110 x 54mm Rectangular Wall Plate1 x 220x90mm Mounting Clip (Individual)1 x "VX100" - Standard Bathroom Axial fan - 100mm1 x Ducting 90 Degree Bend - 150mm1 x Metal Inline Fan - VENT-355N1 x Curved boot - 150mm1 x Acopel F400-450/1601 x Pre 10:30 Delivery Surcharge1 x Acopel F400-400/1601 x Etaline 355mm - D2 01 3 Phase1 x Acopel F400-355/1601 x TXBR-250 Ecowatt1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Spiral Ducting 1 meter - 150mm1 x Male Ducting Connector - 150mm1 x Ducting T Piece Equal - 150mm1 x Duct Suspension Rings - 100mm1 x Elta Standard Ambient Flexible Connector - 250mm1 x Spigot plate - 150mm1 x Flanged Spigot - 100mm1 x Ancillary Sealing Band - 150mm1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x HQS Bathroom Axial Flow Fan - 125mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT500/4-3AC1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x CBMT/Q 100-06 1 HEATER KIT1 x Curved boot - 800mm1 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT450/4-3AC
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...