• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Soler & Palau VFD-T inverter 5 amp IP541 x Ducting 15 Degree Bend - 250mm1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Three Phase Transformer controllers - RMT 8.0 Amp1 x Flanged Spigot - 400mm1 x Elta SLC710/4B-3AC - IP551 x RTRD - Three Phase Speed Controller - 4 Amp1 x Carriage2 x Female Ducting Connector - 400mm1 x Spiral Duct Grille Termination - 400mm1 x Male Ducting Connector - 400mm1 x Ducting Y Piece - 400mm1 x 220x90mm 90 Degree Vertical Bend1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Duct Suspension Rings - 400mm1 x 150mm Round Connector with Damper1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x Duct Fast Clamps - 400mm1 x Soler & Palau VFD-T inverter 6.8 amp IP541 x Spiral Ducting 3 Meters - 125mm1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Duct Suspension Rings - 250mm1 x CBM 9-9 550w 4P VR (Open Motor)1 x RDS 4 Helios Transformer Controller With Motor Protection1 x Spiral Ducting Additional Courier Surcharge1 x CBM 7/9 4p 300W RE-VR1 x REB-CVF 0-10v Controller1 x 220x90mm 90 Degree Horizontal Bend1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x HV Wall Mounted Belt Drive Fan 1250mm 220V to 240V / 50Hz 1.1kW - Single Phase1 x Three Phase Transformer controllers - RMT 12.0 Amp1 x RTRDU 3 Phase Trickle & Boost 5 Step Speed Controller - 7 Amps1 x RDS 2 Helios Transformer Controller With Motor Protection1 x Three Phase Transformer controllers - RMT 2.5 Amp1 x Spiral Ducting 1 meter - 560mm1 x RTRD - Three Phase Speed Controller - 14 Amp1 x Ancillary Pack for SLC-4001 x Airbrick Grille with flange - 204 x 60mm1 x TUNE-R-160-3-M0 - Control Damper (NO ACTUATOR)1 x SPI-315 C Iris damper1 x RSK400 - Back Draught Shutter1 x SPI-200 C Iris damper1 x Multileaf Volume Control Dampers -600/600 Rectangular Flanged1 x Ancillary Pack for SB-Biflow 400 model1 x Stainless Steel Single Blade Regulating Damper -150mm1 x FSD-TD 350mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Ductwrap Insulation DW501 x Ancillary Pack for SLC-900 for SLC900/4A-3AC and SLC900/8-3AC1 x 204x60mm to 220x90mm Rectangular Adapter1 x Flanged Spigot - 250mm1 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Multileaf Volume Control Dampers -500/500 Rectangular Flanged1 x FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 180mm1 x Ancillary Pack for SLC-5601 x FSD-TD 400mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x TUNE-R-250-3-M0 - Control Damper (NO ACTUATOR)1 x OBD 450x450 - for use with 4WAY-5951 x Ancillary Pack for SB-CYL 400 model1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x 204x60mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Ancillary Pack for SLC-710 for 4 pole Motors1 x 204x60mm Double Airbrick Adapter1 x 204x60mm 45 Degree Vertical Bend1 x Flanged Spigot - 560mm1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...