• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Elta Standard Ambient Flexible Connector - 500mm1 x HCFB/4-630mm plastic impeller plate fan1 x Spiral Ducting 3 Meters - 80mm1 x Helios GigaBox 560mm GBD 560/4/4 centrifugal1 x Circular Ceiling Diffuser - TST 1601 x HA-900 N Cooker Hood1 x MVEx 1,0 Atex Motor Protection Switch1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Remote Fan Status Indicator - RF11 x GB-WSD 500 Weather Protection hood for the Giga-Box Fans - 500mm1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Anti Vibration Duct Suspension Rings - 200mm1 x Elta SLC800/4A-3AC - IP551 x CTI CVA-N 500/560 Outdoor cover for CVAB/T Fans1 x TUNE-R-160-2-M3 - Control Damper1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x GB-WSD 400 Weather Protection hood for the Giga-Box Fans - 400mm1 x HV-RC 230mm (With Wall Kit)1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Elta SLC560/2-3AC with inverter Drive & APK Mounting Kit1 x VBK 65 - Water heating battery1 x Ducting 45 Degree Bend - 200mm1 x MEV300/160 Wireless Boost Switch - SWHWMEV1 x Soler & Palau TCBT/6-800/H - IP651 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Elta SLC560/4A-1AC - IP551 x Soler & Palau TCBT/4-800/K - IP651 x Commercial Activated Carbon Filters - Panel Type - 24" x 24" x 2" - ACP1 x GB-WSG 450 External Weather Louvers for the Giga-Box Fans - 450mm1 x HCFT/4-5001 x 150mm Round 45 Degree Bend1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP315141 x DOL Starter with Isolator - Three phase1 x Soler & Palau TCBT/4-560/L - IP651 x COM-31 x CC-800-5.5kw1 x Remote Indicator RED/GREEN - AM121 x External weather louvre 500w x 500h - WL501 x Isolator Switch - EFF-ISO2 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x TUNE-R-125-3-M4 - Control Damper1 x Elta SPA500/4-1AC - IP541 x Ducting 90 Degree Bend - 125mm1 x Commercial Activated Carbon Filters - Panel Type - 24" x 24" x 1" - ACP1 x Balance S Diffuser - NO RING - 100mm1 x Spare filter for the INOX 600 cooker hood from S&P1 x Ducting 45 Degree Bend - 160mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 4501 x JETLINE-200 - In Line Centrifugal Duct Fan1 x Helios HQW-500/4 - IP551 x Kitchen Grease Filter - Mesh Type NON standard 290mm x 290mm x 47mm Actual1 x Raptor SDA560/46-3AC1 x Elta SLC560/4B-1AC - IP551 x FN091-SDK.6N.V7P21 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x RUCK MTP 30, Stepped Speed control1 x Manual Overide Switch - MOS1 x Classic SAX30/12A Window/Wall Mounted1 x Commercial Activated Carbon Filters - Panel Type - 18" x 18" x 1 - ACP1 x Spiral Ducting 3 Meters - 315mm1 x CTI CVA-N 450 Outdoor cover for CVAB/T Fans1 x TUNE-R-160-3-M0 - Control Damper (NO ACTUATOR)1 x Vent Axia SABRE Plate Mounted Sickle Fans - VSP500141 x CTI CVA-N 355/400 OUTDOOR COVER for CVAB/T Fans1 x Spiral Ducting 3 Meters - 160mm1 x HXP560/4-3 - 4 Pole - Three Phase1 x ME04F071LS1AA - Asynchronous motor - single phase1 x Spiral Ducting 1 meter - 355mm1 x HRT/4-500/30-BPN1 x HXP500/4-1 - 4 Pole - Single Phase1 x TUNE-R-160-2-M1 - Control Damper1 x Vent Axia KAF Kitchen Extract Fan - 560mm - 2 Pole - Single Phase1 x Ducting 90 Degree Bend - 200mm1 x IP65 Remote Speed Adjustment Station1 x Raptor SDA250/4-1AC1 x TUNE-R-140-3-M4 - Control Damper
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...