• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 470.94 (excl. VAT)

£ 565.13 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Airvent ceiling fan controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x CBT-100N Centrifugal1 x TG-K Duct temperature sensor1 x Contactor Interface Station - CI91 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6304 x Helios HQW-200/4 - IP551 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta 6 Amp Electronic single phase speed controller.1 x WS - Reversing Switch from Helios Fans2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x UB47- Universal Insulated Terminal1 x GXC6EC - High Performance Extract Fan1 x Speed Controller - REB2.5-N1 x DDMP 12-12 3F 1810W M6A4 DG01 x Helios HQW-630/4 - IP551 x Easy-fix termination kit - High Rise Ventilator - EFT4 x Transformer (silent) speed controller - RE 3.0 Amp1 x Electronic extractor fan speed controller - FSC 1.52 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x SAVE VSR 300 heat recovery unit1 x Elta - Room Sensor - Temp/Humid/C021 x TUNE-R-200-3-M4 - Control Damper1 x TG-K3/NTC10-01 - Duct temperature sensor1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Quietflow SQS100-1ECL - Centrifugal Box Fan1 x VEKA INT 2000/15.0-L1 EKO1 x EBM-Papst D3G133-BF05-14 Double inlet1 x DA9/9-NT1 x AIRVENT speed control - AIR4019611 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Silentub - STUB 1001 x SG-200 Fan Guard for the HQW 2003 x Remote Timer Control - 13511 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Mini Diffuser - 100mm1 x REE-1 Electronic Speed Controller1 x Speed Controller - REB1-N1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Multiflow SMB550/4-1AC1 x Speed Controller - REB162 x MTP 10, 10K, Speed control1 x DDMP 10-08 3F 2210W M6A4 DG01 x Speed Controller - REB51 x Vent Axia Silent 100T (TIMER)1 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x DDMP 07/07 Mounting Flange2 x TG-R room temperature sensor1 x ELTA - Three Phase Transformer 3amps1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x IR24-P - Presence detector1 x TUNE-R-200-3-M1 - Control Damper1 x Transformer Speed Control - RTRE- 12.0Amp1 x Singleflow SSDL315-1EC1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Two Speed Switch - REGUL-21 x Comefri - TLZ 560 R - High Performance Scroll Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/8 4 Pole 373watt CVR1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CBA-100 Inlet Flange for CBT-1001 x Elta Wall Cowl SWC56/631 x CPTA-E Flush mounted PIR sensor with timer1 x DS-2 2-Speed Switch (3 Phase)1 x Helios TSW 1.5 Amp Transformer speed controller1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x ACO8AC/EC AutoChangeover panel1 x Elta Variable Speed Drive IP66 - 5.5KW1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x Potentiometer EGH 01 - for DDMP Fans1 x CBP-18/18-RC Belt Driven Centrifugal Fans1 x Capacitor 2uf for use with the EBM A4E range1 x Elta Variable Speed Drive IP66 - 4.0KW1 x ACO3TO-ADS-VFC-7.1A1 x Helios RR-250-C Centrifugal inline fan1 x Isolator Switch - EFF-ISO1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x Helios HQW-315/4 - IP551 x Duct Termination with Mesh - 450mm1 x TUNE-R-200-3-M2 - Control Damper
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...