• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x Ducting T Piece Equal - 400mm1 x CBMT/Q 200-54 1 HEATER KIT1 x CBMT/Q 500-17 3 HEATER KIT1 x FSAF1250C1DA Silencer 1320/201 x Helios HRFW 355/2 TK1 x 600-VP90SA-4P MOTOR EP90 0.75KW 4POLE ELTA101 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Capacitor 6uf for use with the EBM D4E range1 x Spiral Duct Grille Termination - 400mm1 x Male Ducting Connector - 400mm1 x Manrose 150mm - XF150BHP2 x Ducting 45 Degree Bend - 400mm1 x HQS Bathroom Axial Flow Fan - 125mm1 x Ducting 30 Degree Bend - 400mm1 x Ducting 90 Degree Bend - 400mm1 x Flanged Spigot - 400mm1 x Spiral Ducting 1 meter - 400mm1 x Spigot plate - 400mm1 x Kitchen Grease Filter - Mesh Type NON standard 390mm x 240mm x 40mm Actual1 x CBMT/Q 125-12 1 HEATER KIT1 x Elta Unpodded Silencer Melinex 1D-560mm1 x CBMT/Q 400-55 1 HEATER KIT1 x CBMT/Q 315-30 1 HEATER KIT1 x CBMT/Q 200-30 1 HEATER KIT1 x Elta Unpodded Silencer Melinex 2D-450mm1 x Elta SLC355/4-3AC - IP551 x FSAF315B2DX Silencer 355/81 x Helios HRFW 355/4 TK1 x FSAF1000C1DA SILENCER 1070/161 x AirTrak Heater-315mm1 x AL 355 D2 01 - High Performance Long Cased Axial Fan1 x Elta Unpodded Silencer Melinex 2D-560mm1 x Soler & Palau TCBT/6-355/H - IP441 x Raptor SDA350/4-1EC1 x Soler & Palau TCBB/6-355/H - IP441 x Circular Inline Silencers - 600mm - 600mm1 x Soler & Palau HXM-300mm1 x CBMT/Q 250-30 1 HEATER KIT1 x Elta Podded Silencer 2D- 710mm1 x CBMT/Q 400-9 3 HEATER KIT1 x Soler & Palau TCBB/4-355/H - IP441 x Elta Unpodded Silencer Melinex 2D-1000mm Dia1 x Helios VARD 355/2/2-TK1 x Elta Podded Silencer 1D- 710mm1 x ZAC- 350 -4-11 x EX 140A-4C Mounting Kit for 125mm Duct1 x EKHR 280-2SW BCMI1 x HRU Controller1 x TCDH-EXD Atex roof mounted Series1 x Prio 150E2 circular duct fan1 x KRJ - 160 Inlet Guard for CBB/CBT fans1 x KV 250 L Sileo1 x TD1300 Mixvent - 250mm1 x Female Ducting Connector - 315mm1 x SEL355/4-1AC1 x Spigot plate - 630mm1 x Female Ducting Connector - 800mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...