• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 470.94 (excl. VAT)

£ 565.13 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

2 x Vent Axia ACM 100 inline mixed flow duct fan3 x Speed Controller - REB1-N2 x Speed Controller - REB11 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3002 x AIRVENT speed control - AIR4019611 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH2 x ACOAS/ AC/EC Auto Changeover 8Amp2 x Mini Diffuser - 100mm1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Helios TSW 7.5 Amp Transformer speed controller1 x Elta 10 Amp Electronic single phase speed controller.2 x Electronic extractor fan speed controller - FSC 1.51 x ELTA - Single Phase Transformer 2amps1 x EFSC-3N- Single Phase Speed Control1 x TDP-D Pressure Sensor with Display2 x EC6H - Reversible Group Fan Electronic Controller1 x ELTA - Single Phase Transformer 8amps1 x Elta 3 Amp Electronic single phase speed controller.1 x Elta 3 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x ELTA - Single Phase Transformer 12amps1 x ELTA - Single Phase Transformer 4amps2 x Airvent ceiling fan controller1 x Elta Variable Speed Drive IP66 - 0.75KW (1ph to 3ph)1 x EFSC-6N- Single Phase Speed Control1 x COM-31 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x TTC-2000 Three phase electric heater controller1 x EC-Vent control board1 x ACO8AC/EC AutoChangeover panel1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Transformer (silent) speed controller - RE 3.0 Amp1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent Room Unit1 x CBS-60 Outlet Flange for CSB/CBT-601 x Easy-fix termination kit - High Rise Ventilator - EFT3 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B2 x Transformer (silent) speed controller - RE 1.5 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x EBM-Papst D4E225-BC01-17 Double inlet1 x VEKA INT 2000/15.0-L1 EKO2 x Silentub - STUB 1001 x EBM-Papst D3G133-BF05-14 Double inlet2 x Potentiometer EGH 01 - for DDMP Fans1 x Run On Timer - 5s - 4hrs - RT5A1 x DV-ROF-V-225 Roof mounted unit2 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Remote controller FLEX - for VEKO INT2 x RDS 11 Helios Transformer Controller With Motor Protection1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Elta 6 Amp Electronic single phase speed controller with TK2 x Vent Axia ACM 150 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x DEF-140T Inlet Guard for the CBT-100N1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Isolator Switch - ISOSW2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Remote Timer Control - 13511 x Vent Axia T-Series Controller1 x Helios HQW-630/4 - IP551 x Speed Controller - REB31 x Transformer Speed Control - RTRE- 5.0Amp1 x Speed Controller - REB51 x Transformer Speed Control - RTRE- 7.0Amp1 x EM30-24 Control Panel Commissioning Service2 x Transformer Speed Control - RTRE- 1.5Amp2 x DEF-CBM-RE-7 - Protection Guard1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)2 x Commercial Single or 3 phase Fan Reversing Switch - RS13 x MTP 10, 10K, Speed control1 x REE-2 Electronic Speed Controller1 x Elta Wall Cowl SWC45/501 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)2 x Multiflow SMB550/4-1AC1 x Vent Axia Silent 100T (TIMER)1 x Elta Louvre Shutter - 400mm1 x CBT-100N Centrifugal1 x QPTW 250C Acoustic Twin Fan with Controller1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x DDMP 09/09 Mounting Flange2 x Speed Controller - REB2.5-N1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x PIR Sensor - PIR41 x GXC6EC - High Performance Extract Fan1 x Elta 2 Amp Electronic single phase speed controller.1 x Elta 6 Amp Electronic single phase speed controller.1 x RDH FLEX-SQUARE - ADH/RDH 04503 x UB47- Universal Insulated Terminal1 x DDMP 12-12 3F 1810W M6A4 DG01 x Compact SCD450/4-1AC1 x GENIOX 11 Internal Mounted Unit1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Temperature Fan Speed Controller - ATCP4-WMS1 x Transformer 5 Speed Controller - ATC1-10TK2 x Transformer 5 Speed Controller - ATC1-4TK2 x Transformer 5 Speed Controller - ATC1-8TK1 x Transformer 5 Speed Controller - ATC1-12TK1 x Helios TSW 3 Amp Transformer speed controller1 x Helios TSW 1.5 Amp Transformer speed controller1 x Vent Axia ACM 200 inline mixed flow duct fan1 x CS2 Current Switch1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x 7 Day Programmable TIMECLOCK1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x WS - Reversing Switch from Helios Fans1 x MWS 1.5 – Transformer Controller With Motor Protection2 x Transformer Speed Control - RTRE- 12.0Amp1 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x TG-K3/NTC10-01 - Duct temperature sensor1 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x REE-1 Electronic Speed Controller2 x CBA-60 Inlet Flange for CBT-601 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CBM 9-9 550w 4P VR (Open Motor)2 x Helios HQW-315/4 - IP551 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x MTS10- extractor fan 3 step switch1 x Helios PU10 Speed Potentiometer (Flush Mounted)2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x DDMP 09-09 3F 2130W M6A4 DG01 x ELM 20 EX Flexible Cuff for ERM 222 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x PIR Sensor - PIR21 x TD Mixvent 800/200 EEXEIIT31 x SAVE VSR 300 heat recovery unit1 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x Elta Variable Speed Drive IP66 - 4.0KW
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...