• Model:CAB-250N

Acoustic Box Fans (Inline) - CAB-250N

£ 448.51 (excl. VAT)

£ 538.21 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 1185 m3/h
Max Power: 400 Watts
Max Current: 1.73 Amps
Sound pressure Level (dB(A))@3m: 31db - Radiated
Temperature Range: -20/+40*C
Weight: 27 Kgs
Part Num: 5113216500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-200 Data Sheet

1 x AXCBF 250D2-32 Bifurcated Axial Fan1 x *VORT HRW 30 MONO Evo - Single Room Heat Recovery Unit,1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x Helios AV200 External Wall Fan1 x Male Ducting Connector - 800mm1 x K 250 L Sileo1 x Ducting T Piece Equal - 300mm1 x 220x90mm x 2m Insulated Rectangular Duct1 x "VX100" - Standard Bathroom Axial fan - 100mm1 x Spiral Duct Grille Termination - 80mm1 x QP315C Acoustic Fan - 315mm1 x 100mm Round Wall Plate1 x Ducting 15 Degree Bend - 315mm1 x Classic SAX30/12AR Window/Wall Mounted1 x DA7/9 Feet1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x Eco Hand Drier1 x CVAT Acoustic Kitchen Fan & Inverter Kit - CVAT/6-15000/710 ND - Pack 101 x Elta Variable Speed Drive IP66 - 7.5KW1 x Rectangular Airbrick Adaptor1 x KD 250 M1 Circular duct fan1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Helios DDF-400 Roof Cowl1 x Ductwrap Insulation DW501 x Soler & Palau TCBB/2-250/H - IP541 x Ducting T Piece Equal - 160mm1 x Casals Circular Outlet Connection Flange - 5102018031 x Spigot plate - 450mm1 x 204x60mm to 125mm Insulated Straight Adapter1 x Jetflow-HIT Metal inline - 125mm1 x Elta Turboflow-TF - 450mm - Three phase1 x Purlin Box 350 for RAW Cowls1 x FSAF500FTX 500 mounting feet (Pair)2 x Elta Wall Cowl SWC45/501 x EM30-24 Electro-Mechanical Control Panel1 x Duct Termination with Mesh - 100mm1 x Ducting 90 Degree Bend - 450mm1 x Spigot plate - 800mm1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Singleflow SSDL500-1EC1 x Impeller Side Guard - 450mm1 x Insulated extract Plenum 6+11 x HCF - Ceiling Fan 1400mm (56 inch)1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x 100mm Round Connector1 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x Anti Vibration Duct Suspension Rings - 355mm1 x Elta SCP250-1EC - IP551 x Duct Fast Clamps - 100mm1 x Roof Axial Cowl - RAW10001 x Spigot plate - 315mm1 x KV 200 L Sileo1 x HRFD 400/4/2 Cased Axial Fan 400mm - 3 Phase1 x HRB/4-350-BPN1 x BDB 400 TM - High Pressure Centrifugal Fan1 x HV STYLVENT Wall Kit Threaded Rods1 x Elta SLC450/4-3AC - IP551 x KVK SLIM 200 EC - Centrifugal Circular Duct Fan1 x FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 180mm1 x Duct Suspension Rings - 200mm1 x Soler & Palau - TGT/4-450-6/0.55kW 32 Degree1 x Flexible PVC Ducting - 204x601 x Frequency converter FU 075 14 - IP661 x Etaline 200mm1 x Elta Unpodded Silencer Melinex 1D-450mm1 x ECO-500 Kitchen Extract Fan1 x DKEX 315-4 Centrifugal High Performance ATEX Fan1 x FSD-TD 400 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Access Door for Circular Duct - 400 x 300 - SIZE 631 x Acoustic Box Fans (Inline) - CAB-2001 x 125mm Round Equal T Piece1 x CCZ-404 (Single Phase)1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Duct Fast Clamps - 200mm1 x Ducting 15 Degree Bend - 150mm1 x Ducting 15 Degree Bend - 560mm1 x ACQ-20012D Acoustic Inline Box Fan1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/4-3 Three Phase
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...